Machine-readable passport
A machine-readable passport (MRP) is a machine-readable travel document (MRTD) with the data on the identity page encoded in optical character recognition format. Many countries began to issue machine-readable travel documents in the 1980s.
Most travel passports worldwide are MRPs. They are standardized by the ICAO Document 9303 (endorsed by the International Organization for Standardization and the International Electrotechnical Commission as ISO/IEC 7501-1) and have a special machine-readable zone (MRZ), which is usually at the bottom of the identity page at the beginning of a passport. The ICAO Document 9303 describes three types of documents. Usually passport booklets are issued in "Type 3" format, while identity cards and passport cards typically use the "Type 1" format. The machine-readable zone of a Type 3 travel document spans two lines, and each line is 44 characters long. The following information must be provided in the zone: name, passport number, nationality, date of birth, sex, and passport expiration date. There is room for optional, often country-dependent, supplementary information. The machine-readable zone of a Type 1 travel document spans three lines, and each line is 30 characters long.
The advantages of machine-readable passports include:
- Faster processing of arriving passengers by immigration officials.
- More reliable than a human read, compared to the manually read passports that preceded them.
Format
Passport booklets
Passport booklets have an identity page containing the identity data. This page shall be in the TD3 size which means 125 × 88 mm (4.92 × 3.46 in).
The data of the machine-readable zone consists of two rows of 44 characters each. The only characters used are A–Z, 0–9 and the filler character <.
The format of the first row is:
Positions | Length | Characters | Meaning |
---|---|---|---|
1 | 1 | alpha | P, indicating a passport |
2 | 1 | alpha+< | Type (for countries that distinguish between different types of passports) |
3–5 | 3 | alpha+< | Issuing country or organization (ISO 3166-1 alpha-3 code with modifications) |
6–44 | 39 | alpha+< | Surname, followed by two filler characters, followed by given names. Given names are separated by single filler characters |
In the name field, spaces, hyphens and other punctuation are represented by <, except apostrophes, which are skipped. If the names are too long, names are abbreviated to their most significant parts. In that case, the last position must contain an alphabetic character to indicate possible truncation, and if there is a given name, the two fillers and at least one character of it must be included.
The format of the second row is:
Positions | Length | Characters | Meaning |
---|---|---|---|
1–9 | 9 | alpha+num+< | Passport number |
10 | 1 | numeric | Check digit over digits 1–9 |
11–13 | 3 | alpha+< | Nationality (ISO 3166-1 alpha-3 code with modifications) |
14–19 | 6 | numeric | Date of birth (YYMMDD) |
20 | 1 | num | Check digit over digits 14–19 |
21 | 1 | alpha+< | Sex (M, F or < for male, female or unspecified) |
22–27 | 6 | numeric | Expiration date of passport (YYMMDD) |
28 | 1 | numeric | Check digit over digits 22–27 |
29–42 | 14 | alpha+num+< | Personal number (may be used by the issuing country as it desires) |
43 | 1 | numeric | Check digit over digits 29–42 (may be < if all characters are <) |
44 | 1 | numeric | Check digit over digits 1–10, 14–20, and 22–43 |
The check digit calculation is as follows: each position is assigned a value; for the digits 0 to 9 this is the value of the digits, for the letters A to Z this is 10 to 35, for the filler < this is 0. The value of each position is then multiplied by its weight; the weight of the first position is 7, of the second it is 3, and of the third it is 1, and after that the weights repeat 7, 3, 1, and so on. All values are added together and the remainder of the final value divided by 10 is the check digit.
Some values that are different from ISO 3166-1 alpha-3 are used for the issuing country and nationality field:[1]
- D: Germany
- GBD: British Overseas Territories Citizen (BOTC) (note: the country code of the overseas territory is used to indicate issuing authority and nationality of BOTC), formerly British Dependent Territories Citizen (BDTC)
- GBN: British National (Overseas)
- GBO: British Overseas Citizen
- GBP: British Protected Person
- GBS: British Subject
- UNA: specialized agency of the United Nations
- UNK: Resident of Kosovo to whom a travel document has been issued by the United Nations Interim Administration Mission in Kosovo (UNMIK)
- UNO: United Nations organization
- XOM: Sovereign Military Order of Malta
- XXA: Stateless person, as per the 1954 Convention Relating to the Status of Stateless Persons
- XXB: Refugee, as per the 1951 Convention Relating to the Status of Refugees
- XXC: Refugee, other than defined above
- XXX: Unspecified nationality
Other values, which do not have broad acceptance internationally, include:
Official travel documents
Smaller documents such as identity and passport cards are usually in the TD1 size, which is 85.6 * 54.0 mm (3.37 * 2.13 in), the same size as credit cards. The data of the machine-readable zone in a TD1 size card consists of three rows of 30 characters each. The only characters used are A–Z, 0–9 and the filler character <.
Some official travel documents are in the larger TD2 size, 105.0 * 74.0 (4.13 * 2.91 in). They have a layout of the MRZ with two rows of 36 characters each, similar to the TD3 format, but with 31 characters for the name, 7 for the personal number and one less check digit. Yet some official travel documents are in the booklet format with a TD3 identity page.
The format of the first row for TD1 (credit card size) documents is:
Positions | Length | Chars | Meaning |
---|---|---|---|
1 | 1 | alpha | I, A or C |
2 | 1 | alpha+< | Type, This is at the discretion of the issuing state or authority, but 1–2 should be IP for passport cards, AC for Crew Member Certificates and V is not allowed as 2nd character. ID or I< are typically used for nationally issued ID cards |
3–5 | 3 | alpha+< | Issuing country or organization (ISO 3166-1 alpha-3 code with modifications) |
6–14 | 9 | alpha+num+< | Document number |
15 | 1 | num+< | Check digit over digits 6–14 |
16–30 | 15 | alpha+num+< | Optional |
In addition to ISO 3166-1 alpha-3 code with modifications used for issuing country in passports, also the following organization is accepted:
The format of the second row is:
Positions | Length | Chars | Meaning |
---|---|---|---|
1–6 | 6 | num | Date of birth (YYMMDD) |
7 | 1 | num | Check digit over digits 1–6 |
8 | 1 | alpha+< | Sex (M, F or < for male, female or unspecified) |
9-14 | 6 | num | Expiration date of document (YYMMDD) |
15 | 1 | num | Check digit over digits 9–14 |
16–18 | 3 | alpha+< | Nationality |
19–29 | 11 | alpha+num+< | Optional1 |
30 | 1 | num | Check digit over digits 6–30 (upper line), 1–7, 9–15, 19–29 (middle line)[2] |
1: United States Passport Cards, as of 2011, use this field for the application number that produced the card.
The format of the third row is:
Positions | Length | Chars | Meaning |
---|---|---|---|
1–30 | 30 | alpha+< | Surname, followed by two filler characters, followed by given names |
Machine-readable visas
The ICAO Document 9303 part 7 describes machine-readable visas. They come in two different formats:
- MRV-A - 80 mm × 120 mm (3.15 in × 4.72 in)
- MRV-B - 74 mm × 105 mm (2.91 in × 4.13 in)
The format of the first row of the machine-readable zone is:
Positions | Length | Chars | Meaning |
---|---|---|---|
1 | 1 | alpha | "V" |
2 | 1 | alpha+< | Type, this is at the discretion of the issuing state or authority |
3–5 | 3 | alpha+< | Issuing country or organization (ISO 3166-1 alpha-3 code with modifications) |
6–44 | 39 | alpha+< | Name in MRV-A |
6–36 | 31 | alpha+< | Name in MRV-B |
The format of the second row is:
Positions | Length | Chars | Meaning |
---|---|---|---|
1-9 | 9 | alpha+num+< | Passport or Visa number |
10 | 1 | num | Check digit |
11–13 | 3 | alpha+< | Nationality |
14–19 | 6 | num | Date of birth |
20 | 1 | num | Check digit |
21 | 1 | alpha+< | Sex |
22-27 | 6 | num | Valid until |
28 | 1 | num | Check digit |
29–44 | 16 | alpha+num+< | Optional data in MRV-A |
29–36 | 8 | alpha+num+< | Optional data in MRV-B |
Specifications common to all formats
The ICAO document 9303 part 3 describes specifications common to all Machine Readable Travel Documents.
The dimensions of the effective reading zone (ERZ) is standardized at 17.0mm (0.67 in) in height with a margin of 3mm at the document edges and 3.2mm at the edge against the visual readable part. This is in order to allow use of a single machine reader.
Only characters A to Z (upper case), 0–9, and < (angle bracket) are allowed.
Nationality codes and checksum calculation
The nationality codes shall contain the ISO 3166-1 alpha-3 code with modifications for all formats, as described in the passport booklets chapter. The check digit calculation method is also the same for all formats.
Names
Due to technical limits, alphabets inside Machine Readable Zone (MRZ) need to be restricted to A–Z and angle brackets.
Apostrophes and similar have to be omitted, but hyphens and spaces should be replaced by an angle bracket. Diacritical marks are not permitted in the MRZ. Even though they may be useful to distinguish names, the use of diacritical marks in the MRZ could confuse machine-reading equipment.
Section 6 of the 9303 part 3 document specifies transliteration of letters outside the A–Z range. It recommends that diacritical marks on Latin letters A-Z are simply omitted (ç → C, ð → D, ê → E, etc.), but it allows the following transliterations:
å → AA
ä → AE
ð → DH
ij (Dutch letter; capital form: IJ, the J as part of the ligature being capitalized, too)→ IJ
ö → OE
ü → UE (German) or UXX (Spanish)
ñ → NXX
The following transliterations are mandatory:
æ → AE
ø, œ → OE
ß → SS
þ → TH
There are also tables for the transliteration of names written using Cyrillic and Arabic scripts.
People having names using the listed letters sometimes have trouble with ignorant officials; for example, the document is thought to be a forgery or with airline tickets not having the same spelling as the passport. Consequently, it is often best to use the exact spelling used in the machine-readable zone for the airline ticket or ESTA, and refer to this zone if being asked questions.
Different spellings of the same name within the same document
Names containing non-English letters are usually spelled in the correct way in the non-machine-readable zone of the passport, but are mapped according to the standards of ICAO in the machine-readable zone.
In Germany, Austria and Scandinavia it is standard to use the Å→AA, Ä or Æ→AE, Ö or Ø→OE, Ü→UE, and ß→SS mappings, so Müller becomes MUELLER, Gößmann becomes GOESSMANN, and Hämäläinen becomes HAEMAELAEINEN.
Names originally written in a non-Latin writing systems may pose another problem if there are various internationally recognized transcription standards. For example, the Russian surname Горбачёв is transcribed "Gorbachev" in English and according to the ICAO 9303 rules, "Gorbatschow" in German,"Gorbatchov" in French, "Gorbachov" in Spanish, "Gorbaczow" in Polish, and so on.
Sometimes, as with US visas, simple letters stripped of their proper diacriticals are used (ag: MULLER, GOSSMANN, HAMALAINEN). German credit cards use either the correct or the mapped spelling in their non-machine-readable zone.
First and given names
For airline tickets, visas and more, there is an advice to only use the first name, as written in the passport. This is a problem for people who use their second name (as defined by the order they have in the passport) as their main name in daily speech. It is common, for example in Scandinavia, that the second or even third name is the defined for daily usage, for example the actor Hugh Laurie, whose full name is James Hugh Calum Laurie. Swedish travel agents usually book people using the first and daily name if the first one is not their main name, despite advise to use only the first name. If this is too long, the spelling in the MRZ could be used.
For people using a variant of their first name in daily speech, for example the former US president Bill Clinton whose full name is William Jefferson Clinton, the advice is to spell their name as in the passport.
Chinese and Korean names might pose a challenge too, since the family name is normally written first.
See also
- Basic Access Control
- Biometric passport
- Card standards
- ISO/IEC 14443 (Proximity card standard)
- List of national identity card policies by country
- Identity document
- Identity Cards Act 2006 United Kingdom
- Universal Electronic Card
References
- ↑ http://www.icao.int/atb/sfbranch/files/MRTDStateCode.pdf Archived August 12, 2007, at the Wayback Machine.
- ↑ "Microsoft Word - Doc.9303.Part.03.7th.Edition.alltext.en.docx - 9303_p3_cons_en.pdf" (PDF). Doc 9303: Machine Readable Travel Documents, Part 3: Specifications Common to all MRTDs (Seventh ed.). International Civil Aviation Organization. 2015. ISBN 978-92-9249-792-7. Retrieved 2016-03-03.
External links
- A description of the Machine Readable Passport Zone
- MRTD - Machine Readable Travel Document - Home (ICAO)
- ICAO Standards for e-Passports: Machine Readable Travel Documents