NER Class X

NER Class X
LNER Class T1

No. 69919 at Stockton Locomotive Depot 1954
Type and origin
Power type Steam
Designer Wilson Worsdell
Builder
Build date 1909–1910 (10) and 1925 (5)
Total produced 15
Specifications
Configuration 4-8-0T
UIC class 2′D n2t
Gauge 4 ft 8 12 in (1,435 mm)
Leading dia. 3 ft 1 14 in (0.946 m)
Coupled dia. 4 ft 7 14 in (1.403 m)
Wheelbase 29 ft 0 in (8.839 m)
Length 42 ft 1 in (12.827 m)
Axle load 18.00 long tons (18.29 t)
Adhesive weight 67.60 long tons (68.68 t)
Loco weight 85.40 long tons (86.77 t)
Fuel type Coal
Fuel capacity 4.25 long tons (4.32 t)
Water cap 2,500 imp gal (11,000 l; 3,000 US gal)
Firebox:
  Firegrate area
23 sq ft (2.1 m2)
Boiler pressure 175 lbf/in2 (1.21 MPa)
Heating surface 1,295 sq ft (120.3 m2)
  Tubes 1,168 sq ft (108.5 m2)
  Firebox 127 sq ft (11.8 m2)
Cylinders Three
Cylinder size 18 in × 26 in (457 mm × 660 mm)
Valve gear Stephenson
Valve type 8 34-inch (222 mm) piston valves
Performance figures
Tractive effort 34,080 lbf (151.6 kN)
Career
Operators
Power class BR: 7F, 5F from My 1953
Axle load class LNER/BR: Route availability 8
Withdrawn 1937–1961
Disposition All scrapped

The NER Class X (LNER Class T1) was a class of 4-8-0T tank locomotive designed by Wilson Worsdell for the North Eastern Railway.[1] They were intended for use as powerful shunting engines to arrange and move coal wagons for loading into ships.[1] In total 15 were built, 10 by the NER between 1909 and 1910, and a further five in 1925 by the London and North Eastern Railway (LNER).[1] They had three cylinders with divided drive: the inside cylinder driving the leading axle, the outside cylinders driving the centre.[2]

Overview

The reversing gear was originally mechanical, but was replaced on all but two of the locomotives (nos. 1355/8) by steam-operated reversing gear between 1932 and 1934.[3] The steam reversing gear was removed again between 1941 and 1947.[3] In 1929, No. 1656 was moved to the newly built Whitemoor Yard at March, Cambridgeshire.[4] In 1932, this locomotive was replaced by Nos. 1355 and 1358.[4] Whitemoor preferred the ex-GCR 0-8-4T (LNER Class S1) for hump shunting, so in 1934 No 1358 was moved to Doncaster, and No. 1355 to Mexborough.[4] In 1936, No. 1355 moved to King's Cross to shunt the engine shed for seven weeks, before joining No. 1358 in Doncaster.[4] These two locomotives were scrapped at Doncaster in 1937.[4] The remaining T1s continued to work coal trains at various docks and marshalling yards throughout North East England.[4] After World War II, coal exports never returned to their pre-war levels.[5] Hence, many of the T1s moved to other sheds for heavy shunting duties.[5]

Numbering

On the North Eastern Railway the first ten locomotives were numbered 1350–9; these numbers were retained following the formation of the LNER on 1 January 1923. The five built in 1925 were given LNER numbers 1656–60.[6] In 1946, the thirteen remaining locomotives were renumbered 9910–22; these all passed to British Railways in 1948, being renumbered 69910-69922 between 1948 and 1951.[7]

Preservation

Two T1s having been withdrawn in 1937, the remainder were withdrawn between 1955 and 1961 and none has survived into preservation.[5]

Notes

Sources

External links

This article is issued from Wikipedia - version of the 3/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.