LNER Class Y1

LNER Class Y1
Type and origin
Power type Steam
Designer Sentinel Waggon Works
Builder Sentinel Waggon Works
Build date 1925-1927
Total produced 24
Specifications
Configuration 0-4-0 geared tank
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Driver dia. 2 ft 6 in (0.76 m)
Wheelbase 7 ft 0 in (2.13 m)
Loco weight Y1/1, 20.35 long tons (20.68 t)
Y1/2, 19.8 long tons (20.1 t)
Y1/3, 14 long tons (14 t)
Y1/4, 19.35 long tons (19.66 t)
Fuel type coal
Fuel capacity 0.6–0.8 long tons (0.61–0.81 t)
Water cap 300 imp gal (1,400 l; 360 US gal)
Firebox:
 • Firegrate area		 3.97 sq ft (0.369 m2) (all but Y1/2)
5.1 sq ft (0.47 m2) (Y1/2)
Boiler 2 ft 8 1⁄2 in (0.826 m) (all but Y1/2)
3 ft 1 in (0.94 m) (Y1/2)
Boiler pressure 275 psi (1.90 MPa)
water tube boiler
Heating surface 64.15 sq ft (5.960 m2) (all but Y1/2)
 • Tubes 27.73 sq ft (2.576 m2) (all but Y1/2)
36.5 sq ft (3.39 m2) (Y1/2)
 • Firebox 26.7 sq ft (2.48 m2) (all but Y1/2)
35 sq ft (3.3 m2) (Y1/2)
Superheater:
 ​
 • Heating area 9.72 sq ft (0.903 m2) (all but Y1/2)
Cylinders two
Cylinder size 6 3⁄4 in × 9 in (170 mm × 230 mm)
Performance figures
Tractive effort 68130-68142 and 68152-68153: 7,260 lbf (32,300 N)
68143-68151: 8,870 lbf (39,500 N)
Career
Operators London & North Eastern Railway, British Railways
Disposition 1 preserved, remainder scrapped

The LNER Class Y1 was a class of 0-4-0 geared steam locomotives built by Sentinel Waggon Works for the London and North Eastern Railway and introduced in 1925. They passed into British Railways ownership in 1948 and were numbered 68130-68153 [1] but 68134 was withdrawn almost immediately and may not have carried its BR number.

Power unit

The superheated vertical water-tube boiler and the engine were similar to those used in Sentinel steam wagons. There were variations within the class as regards boiler size and fuel capacity and these were denoted by sub-classes Y1/1 to Y1/4.

The engines had poppet valves and reversing was by sliding camshaft. The advantage of the water-tube boiler was that steam could be raised much more quickly than with a conventional fire-tube boiler.

Transmission

Final drive to the wheels was by sprocket chain. Some engines had a gear ratio of 11:25 and some 9:25. Tractive effort was:

Sub-classes

There is disagreement between sources. According to LNER Encyclopedia [6] there were six Y1/1s and sixteen Y1/2s.

Preservation

References

  1. ↑ Ian Allan ABC of British Railways Locomotives, 1948 edition, part 4, pp 46-47
  2. ↑ http://www.railuk.info/steam/getsteamclass.php?item=Y1/1
  3. ↑ http://www.railuk.info/steam/getsteamclass.php?item=Y1/2
  4. ↑ http://www.railuk.info/steam/getsteamclass.php?item=Y1/3
  5. ↑ http://www.railuk.info/steam/getsteamclass.php?item=Y1/4
  6. ↑ http://www.lner.info/locos/Y/y1y3.shtml

External links


This article is issued from Wikipedia - version of the 12/6/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.