Half-precision floating-point format

In computing, half precision is a binary floating-point computer number format that occupies 16 bits (two bytes in modern computers) in computer memory.

In IEEE 754-2008 the 16-bit base 2 format is officially referred to as binary16. It is intended for storage (of many floating-point values where higher precision need not be stored), not for performing arithmetic computations.

Half-precision floating point is a relatively new binary floating-point format. Nvidia and Microsoft defined the half datatype in the Cg language, released in early 2002, and was the first to implement 16-bit floating point in silicon, with the GeForce FX, released in late 2002.[1] ILM was searching for an image format that could handle a wide dynamic range, but without the hard drive and memory cost of floating-point representations that are commonly used for floating-point computation (single and double precision).[2] The hardware-accelerated programmable shading group led by John Airey at SGI (Silicon Graphics) invented the s10e5 data type in 1997 as part of the 'bali' design effort. This is described in a SIGGRAPH 2000 paper[3] (see section 4.3) and further documented in US patent 7518615.[4]

This format is used in several computer graphics environments including OpenEXR, JPEG XR, OpenGL, Cg, and D3DX. The advantage over 8-bit or 16-bit binary integers is that the increased dynamic range allows for more detail to be preserved in highlights and shadows for images. The advantage over 32-bit single-precision binary formats is that it requires half the storage and bandwidth (at the expense of precision and range).[2]

The F16C extension allows x86 processors to convert half-precision floats to and from single-precision floats.

IEEE 754 half-precision binary floating-point format: binary16

The IEEE 754 standard specifies a binary16 as having the following format:

The format is laid out as follows:

The format is assumed to have an implicit lead bit with value 1 unless the exponent field is stored with all zeros. Thus only 10 bits of the significand appear in the memory format but the total precision is 11 bits. In IEEE 754 parlance, there are 10 bits of significand, but there are 11 bits of significand precision (log10(211) ≈ 3.311 decimal digits, or 4 digits ± slightly less than 5 units in the last place).

Exponent encoding

The half-precision binary floating-point exponent is encoded using an offset-binary representation, with the zero offset being 15; also known as exponent bias in the IEEE 754 standard.

Thus, as defined by the offset binary representation, in order to get the true exponent the offset of 15 has to be subtracted from the stored exponent.

The stored exponents 000002 and 111112 are interpreted specially.

Exponent Significand zero Significand non-zero Equation
000002 zero, −0 subnormal numbers (−1)signbit × 2−14 × 0.significantbits2
000012, ..., 111102 normalized value (−1)signbit × 2exponent−15 × 1.significantbits2
111112 ±infinity NaN (quiet, signalling)

The minimum strictly positive (subnormal) value is 2−24 ≈ 5.96 × 10−8. The minimum positive normal value is 2−14 ≈ 6.10 × 10−5. The maximum representable value is (2−2−10) × 215 = 65504.

Half precision examples

These examples are given in bit representation of the floating-point value. This includes the sign bit, (biased) exponent, and significand.

0 01111 0000000000 = 1
0 01111 0000000001 = 1 + 2−10 = 1.0009765625 (next smallest float after 1)
1 10000 0000000000 = −2

0 11110 1111111111 = 65504  (max half precision)

0 00001 0000000000 = 2−14 ≈ 6.10352 × 10−5 (minimum positive normal)
0 00000 1111111111 = 2−14 - 2−24 ≈ 6.09756 × 10−5 (maximum subnormal)
0 00000 0000000001 = 2−24 ≈ 5.96046 × 10−8 (minimum positive subnormal)

0 00000 0000000000 = 0
1 00000 0000000000 = −0

0 11111 0000000000 = infinity
1 11111 0000000000 = −infinity

0 01101 0101010101 = 0.333251953125 ≈ 1/3

By default, 1/3 rounds down like for double precision, because of the odd number of bits in the significand. So the bits beyond the rounding point are 0101... which is less than 1/2 of a unit in the last place.

Precision limitations on decimal values in [0, 1]

Precision limitations on other decimal values

Precision limitations on integer values

ARM alternative half-precision

ARM processors support (via a floating point control register bit) an "alternative half-precision" format, which does away with the special case for an exponent value of 31.[6] It is almost identical to the IEEE format, but there is no encoding for infinity or NaNs; instead, an exponent of 31 encodes normalized numbers in the range 65536 to 131008.

See also

References

  1. ↑ "vs_2_sw". Cg 3.1 Toolkit Documentation. Nvidia. Retrieved 17 August 2016.
  2. 1 2 http://www.openexr.com/about.html
  3. ↑ http://people.csail.mit.edu/ericchan/bib/pdf/p425-peercy.pdf
  4. ↑ http://www.google.com/patents/US7518615
  5. ↑ "Mediump float calculator". Retrieved 2016-07-26. Half precision floating point calculator
  6. ↑ "Half-precision floating-point number support". RealView Compilation Tools Compiler User Guide. 10 December 2010. Retrieved 2015-05-05.

External links

This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.