Australian Standard Garratt

Australian Standard Garratt

Type and origin
Power type Steam
Builder Clyde Engineering
Islington Railway Workshops
Midland Railway Workshops
Newport Workshops
Build date 1943-1945
Total produced 57
Specifications
Configuration 4-8-2+2-8-4
Gauge 3 ft 6 in (1,067 mm)
Driver dia. 48 in (1,219 mm)
Length 85 ft 9 1⁄2 in (26.15 m)
Axle load 8.5 long tons (8.6 t; 9.5 short tons)
Adhesive weight 76.25 long tons (77.5 t; 85.4 short tons)
Loco weight 119 long tons (120.9 t; 133.3 short tons)
Fuel type Coal
Fuel capacity 6 long tons (6.1 t; 6.7 short tons)
Water cap 4,200 imp gal (19,094 l; 5,044 US gal)
Firebox:
 • Firegrate area		 35 sq ft (3 m2)
Boiler pressure 200 psi (1,379 kPa)
Heating surface 2,013 sq ft (187 m2)
Cylinders 4 outside
Cylinder size 14.5 in × 24 in (368 mm × 610 mm)
Performance figures
Tractive effort 34,240 lbf (152.3 kN)
Factor of adh. 4.4
Career
Operators Emu Bay Railway
Fyansford Cement Works Railway
Queensland Railways
South Australian Railways
Tasmanian Government Railways
Western Australian Government Railways
Preserved G33
Disposition 1 preserved, 56 scrapped

The Australian Standard Garratt (ASG) was a Garratt steam locomotive designed in Australia during World War II, and used on 3 ft 6 in (1,067 mm) narrow gauge railway systems in Queensland, South Australia, Western Australia and Tasmania.

History

With the outbreak of World War II, in 1939 the Federal Government formed the Commonwealth Land Transport Board (CLTB) to take responsibility for the country's land transport networks. It had the power to override the decisions of the State railways. In 1942, the CLTB appointed the Commissioner of Railways in Western Australia, Joseph Ellis, to investigate the capacity of Australia's narrow gauge network and recommend what locomotives should be purchased. Ellis recommended that three variations of Garratt locomotive be purchased; heavy, medium and light.[1]

The CLTB elected to build only the light type to allow it to operate on any narrow gauge line in Australia. After an attempt to obtain drawings and licenses from Beyer, Peacock and Company failed, in July 1942 the CLTB recommended to the War Cabinet that 30 locomotives be built locally. In August 1942, the War Cabinet approved the order, this was increased to 65 locomotives in November 1942. The Western Australian Government Railways' Chief Mechanical Engineer Frederick Mills was seconded to lead a team of engineers in Melbourne to design the new locomotive. The Queensland Railways were vocal opponents, stating its preference for a modified version of its C17 class.[1]

The result was the Australian Standard Garratt with the first completed in a record breaking four months in September 1943. Only 57 were completed with the remaining eight cancelled with the end of the war. The locomotives were built by the WAGR's Midland Railway Workshops (10), the Victorian Railways' Newport Workshops (12), the South Australian Railways' Islington Railway Workshops (13), and Clyde Engineering, Sydney (22).[2][3]

In service

Western Australian Government Railways' G26 in 1943
Western Australian Government Railways' G55 in 1952

Because of differences between the states, especially in regard to loading gauges, the sharpness of curves, and axle load, especially in Queensland, the design had to be a compromise, which went against the idea of having a standardised design.[1]

A major flaw in the design was that the leading driving wheels were flangeless, which caused derailments on curves and points. Another key problem, which made the locomotives unpopular with locomotive crews, was the fact that the firebox door opened flat on the floor of the driving cab, maximising heat radiation into the crew compartment.[1] This resulted in them having fairly short lives with most withdrawn by the mid-1950s. Some were resold for use on the Emu Bay and Fyansford Cement Works Railways where they would have more successful careers.[3][4]

Queensland Railways

The Queensland Railways purchased 23. One was never used and another only saw two months service. In September 1945, the driver's union placed a ban on them. Attempts to modify them proved unsuccessful and in 1948, they were written off. Three were sold to the Emu Bay Railway and six to the Tasmanian Government Railways with the remainder scrapped in 1954/55.[5][6]

Tasmanian Government Railways

The Tasmanian Government Railways purchased 14 new and another six second-hand from the Queensland Railways. Two were sold to the Emu Bay Railway with the remainder scrapped in the late 1950s.[5][7]

Western Australian Government Railways

The Western Australian Government Railways purchased 25. They were unpopular with crews, and their use through the state's only tunnel at Swan View caused serious problems, resulting in deaths, industrial disputes,[8] and a Royal Commission.[1][9]

Six were sold to the South Australian Railways in 1952 with the last withdrawn from the WAGR in January 1957.[2][5]

Emu Bay Railway

The Emu Bay Railway purchased three second-hand from the Queensland Railways and two from the Tasmanian Government Railways. It would operate them successfully until the mid-1960s. One was destroyed in an accident in February 1962 with a replacement obtained from the TGR.[3][4][10]

South Australian Railways

In 1952, the South Australian Railways purchased six second-hand from the WAGR to haul lead ore between Cockburn and Port Pirie as an interim solution pending the delivery of the 400 class Garratts, with all condemned by February 1956.[3][11][12]

Fyansford Cement Works Railway

The Fyansford Cement Works Railway purchased G33 from Commonwealth Disposals in August 1945. It was withdrawn in 1957, but maintained in operational condition until the railway closed in 1966 and donated to the Geelong division of the Australian Railway Historical Society.[3] It was on static display at the Australian Railway Historical Society Museum until May 2013, when it was relocated to the Bellarine Railway.[13][14][15]

Class list

Preservation

The only surviving complete ASG is G33, which ran on the Fyansford Cement Works Railway until 1966. It was on static display at the Australian Railway Historical Society Museum in North Williamstown until May 2013, G33 along with a spare boiler was moved by road to the Bellarine Railway, Queenscliff.[13]

Many front ASG water tanks have survived; one at Yatina, South Australia, and two on a farm south of Peterborough, South Australia. Two at Don River Railway in Tasmania and several dotted around the state. These survived as water tanks for steam and firefighting tanks until the early 1980s. A boiler also survives with the Derwent Valley Railway in New Norfolk, Tasmania.

References

  1. 1 2 3 4 5 Report of the Royal Commission appointed to inquire into the Australian Standard Garratt Locomotive Royal Commissioner Albert Wolff 29 August 1946
  2. 1 2 Gunzburg, Adrian (1984). A History of WAGR Steam Locomotives. Perth: Australian Railway Historical Society. pp. 121–124. ISBN 0 9599690 3 9.
  3. 1 2 3 4 5 Oberg, Leon (2010). Locomotives of Australia 1850s-2010. Dural: Rosenberg Publishing. pp. 225–227. ISBN 9781921719011.
  4. 1 2 3 4 5 6 Rae, Lou (1997). The Emu Bay Railway. Sandy Bay: Lou Rae. pp. 200–203, 208, 218. ISBN 0 9592098 6 7.
  5. 1 2 3 Turner, Jim (1997). Australian Steam Locomotives 1896-1958. Kenthurst: Kangaroo Press. pp. 130, 134, 138. ISBN 086417778X.
  6. ↑ Australian Standard Garratt Queensland's Rail Interest Group
  7. 1 2 3 4 5 6 7 8 9 "Steam Locomotives of the Tasmanian Government Railways and its Constituents" Australian Railway History issue 917 March 2014 page 13
  8. ↑ "'Now What Has She Got That 400 Others Haven't Got?'". The Mirror. Perth: National Library of Australia. 4 March 1944. p. 18. Retrieved 13 October 2012.
  9. ↑ Some Aspects of the Australian Standard Garratt Locomotive Minchin, R.S. Australian Railway Historical Society Bulletin, April 1979 pp69-77
  10. ↑ "The Australian Standard Garratt on the Emu Bay Railway" Australian Railway Historical Society Bulletin March 1995 pp59-66
  11. ↑ Fluck, Ronald (1986). Steam Locomotives and Railcars of the South Australian Railways. Adelaide: Mile End Railway Museum. ISBN 0 9595073 3 7.
  12. 1 2 3 4 5 6 7 Narrow Gauge 300 class Chris' Commonwealth Railways Information
  13. 1 2 3 "Get G33 Moving". Bellarine Railway.
  14. ↑ G33 Australian Steam
  15. ↑ War-child Steam Locomotive makes a come-back Queenscliffe Herald June 2013

Bibliography

  • Barry, Kevin (December 1996), "Labour divided: the Garratt strike of 1946", Papers in Labour History (17): 46–67, ISSN 1030-6218 
  • Butrims, Robert; Australian Railway Historical Society. Victorian Division; Geelong Steam Preservation Society (1975), Australia's Garratt, Geelong Steam Preservation Society in conjunction with Australian Railway Historical Society, Victorian Division, ISBN 978-0-9598322-0-4 
  • Durrant, A E (1981). Garratt Locomotives of the World (rev. and enl. ed.). Newton Abbot, Devon, UK; North Pomfret, Vt, USA: David & Charles. ISBN 0715376411. 
  • Gunzburg, Adrian (1968). WAGR Locomotives 1940–1968. Perth: Australian Railway Historical Society (Western Australian Division). pp. 10–12, 47. OCLC 219836193. 

Further reading

External links

Wikimedia Commons has media related to Australian Standard Garratt.
This article is issued from Wikipedia - version of the 10/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.