Warwick W-3 Bantam
| W-3 Bantam | |
|---|---|
| Role | Homebuilt aircraft |
| National origin | United States |
| Designer | Bill Warwick |
| First flight | June 1966 |
| Introduction | 1966 |
| Unit cost |
$1200 in 1971 |
The W-3 Bantam is a simple single place, homebuilt aircraft design from Bill Warwick of Torrance, California.[1]
Design
The W-3 is a single place tricycle gear, low wing aircraft with an open cockpit or bubble canopy. Construction is all metal with a welded-steel-tube forward fuselage with attachment points for the wing spars and engine mount. The fuselage uses non-compound curves and features a square vertical stabilizer[2]
Operational history
The prototype was featured on the cover of the May 1972 issue of Popular Mechanics.[3]
Specifications (W-3 Bantam)
Data from Plane and Pilot
General characteristics
- Length: 13 ft 9 in (4.19 m)
- Wingspan: 18 ft 6 in (5.64 m)
- Empty weight: 535 lb (243 kg)
- Gross weight: 790 lb (358 kg)
- Fuel capacity: 11.5 U.S. gallons (44 L; 9.6 imp gal)
- Powerplant: 1 × Lycoming O-145B Horizontally Opposed Piston
Performance
- Maximum speed: 122 kn; 225 km/h (140 mph)
- Cruise speed: 100 kn; 185 km/h (115 mph)
- Stall speed: 45 kn; 84 km/h (52 mph)
- Rate of climb: 1,000 ft/min (5.1 m/s)
References
- ↑ Air Trails: 77. Winter 1971. Missing or empty
|title=(help) - ↑ "Plane and Pilot W-3 Bantam". Retrieved 22 April 2012.
- ↑ Popular Mechanics. May 1972. Missing or empty
|title=(help)
This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.