Bargeboard

For the aerodynamic device, see Bargeboard (aerodynamics).
Ornate bargeboards to the gable end of a temple in Chang Mai Thailand
The Saitta House, Dyker Heights, Brooklyn, New York, built in 1899 has a thick bargeboard.[1]

Bargeboard (probably from Medieval Latin bargus, or barcus, a scaffold, and not from the now obsolete synonym "vergeboard") is a board fastened to the projecting gables of a roof to give them strength, protection, and to conceal the otherwise exposed end of the horizontal timbers or purlins of the roof to which they were attached. Bargeboards are sometimes moulded only or carved, but as a rule the lower edges were cusped and had tracery in the spandrels besides being otherwise elaborated. The richest example in Britain is one at Ockwells in Berkshire (built 1446–1465), which is moulded and carved as if it were intended for internal work.[2]

In New Orleans, bargeboard is the wood from which many of the creole cottages were constructed in the early to mid-1800s. Barges were constructed up-river to carry goods to New Orleans, and upon arrival dismantled and used for construction of houses. The planks are generally 2 inches (5.1 cm) thick and of varying lengths and widths, although 10 inches (25 cm) width is common. It is hard, solid wood that has lasted between 150 and 200 years in a wet, humid climate.

See also

References

  1. ↑ “Saitta House – Report Part 1”,DykerHeightsCivicAssociation.com
  2. ↑  One or more of the preceding sentences incorporates text from a publication now in the public domain: Chisholm, Hugh, ed. (1911). "Bargeboard". Encyclopædia Britannica. 3 (11th ed.). Cambridge University Press.

External links

This article is issued from Wikipedia - version of the 11/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.