Two dimensional semiconductor

A two-dimensional semiconductor (also known as 2D semiconductor) is a type of natural semiconductor with thicknesses on the atomic scale. The rising research attention towards 2D semiconductors started with a discovery by Geim and Novoselov et al. in 2004,^[1] when they reported a new semiconducting material graphene, a flat monolayer of carbon atoms arranged in a 2D honeycomb lattice. A 2D monolayer semiconductor is significant because it exhibits stronger piezoelectric coupling than traditionally employed bulk forms, which enables 2D materials applications in new electronic components used for sensing and actuating.^[2] In this emergent field of research in solid-state physics, the main focus is currently on designing nanoelectronic components by the use of graphene as electrical conductor, hexagonal boron nitride as electrical insulator, and a transition metal dichalcogenide as semiconductor.^[3]

Materials

Monolayer graphene

Graphene

Graphene's two surfaces are single sheets of carbon atoms arranged in a hexagonal honeycomb lattice. Having two surfaces and lacking bulk makes it the thinnest possible material but also 5 times stronger than steel due to pi and sigma orbital bonds. Graphene has high electron mobility and high thermal conductivity. Although graphene can be used in different applications, one issue regarding graphene is its lack of a band gap, which poses a problem in particular with digital electronics because it is unable to switch off field-effect transistors (FETs).^[4][5]

Layered structure of h-BN

Hexagonal Boron Nitride

Monolayer hexagonal boron nitride (h-BN), also known as ‘white graphene’, is structurally similar to graphite and features a honeycomb arrangement with alternating boron and nitrogen atoms in place of carbon. h-BN has a higher energy gap (5.97 eV) than graphene, thus functions as an insulator instead of a semimetal.^[6] However, it can also function as a semiconductor with enhanced conductivity due to its zigzag sharp edges and vacancies. h-BN is often used as substrate and barrier due to its insulating property. Furthermore, h-BN also has a large thermal conductivity and mechanical strength. Thus, it can be employed as a support for metal catalyst due to its chemical, thermal, acid-base stability and high thermal conductance.

Layered structure of MoS₂, Mo in green, S in yellow

Transition Metal Dichalcogenides

Transition metal dichalcogenides (TMDCs) are a class of two-dimensional materials, which have the chemical formula MX₂, where M represents transition metals from group VI, V and VI, and X represents a chalcogen such as sulfur, selenium or tellurium.^[7] MoS₂, MoSe₂, MoTe₂, WS₂ and WSe₂ are TMDCs. TMDCs have layered structure with a plane of metal atoms in between two planes of chalcogen atoms as shown in Figure 1. Each layer is bonded strongly in plane, but weakly in interlayers. Therefore, TMDCs can be easily exfoliated into atomically thin layers through various methods. TMDCs show layer-dependent optical and electrical properties. When exfoliated into monolayers, the band gaps of several TMDCs change from indirect to direct,^[8] which lead to broad applications in nanoelectronics and optoelectronics.^[9][10]

Synthesis

CVD setup for MoS₂ synthesis

2D semiconductor materials are often synthesized using a chemical vapor deposition (CVD) method. Because CVD can provide large-area, high-quality, and well-controlled layered growth of 2D semiconductor materials, it also allows synthesis of two-dimensional heterojunctions.^[11] When building devices by stacking different 2D materials, mechanical exfoliation followed by transferring is often used.^[3][7] Other possible synthesis methods include chemical exfoliation, hydrothermal synthesis, and thermal decomposition and Langmuir-Blodgett assembly technique.^[12]

Device Applications

Some devices applications include electronic devices, photonic and energy harvesting devices, and flexible and transparent substrates.

Electronic Devices

2D Semiconductors can be used as transistors for digital electronics. The impure charges at the interfaces that are free of dangling bonds, allow for 2D semiconductors to run low-power devices. The 2D semiconductor interface has future potential in nano circuits due to its ability to optimize and regulate thermal transfer.

Proposed TMDC-based high-electron-mobility transistor device with top-gated Schottky contact and TMDC layers with different doping levels

Energy and Harvesting Devices

2D semiconductors have potential for application in the harvesting of solar energy. The atomically thin structure allows for lower surface recombination velocity, which leads to better photocurrent conduction. An improvement on solar cell performance has been shown, while stacking 2D semiconductors with multilayers of graphene.^[13]

Flexible and Transparent Substrates

The thin layer of 2D materials can be used for flexible electronics. In particular, 2D MoS₂ can be used to create thin displays and wearable electronics due to its out of plane flexibility, strong covalent bonds, and diverse electronic properties.^[14]

References