Teredo tunneling

In computer networking, Teredo is a transition technology that gives full IPv6 connectivity for IPv6-capable hosts that are on the IPv4 Internet but have no native connection to an IPv6 network. Unlike similar protocols, it can perform its function even from behind network address translation (NAT) devices such as home routers.

Teredo operates using a platform independent tunneling protocol that provides IPv6 (Internet Protocol version 6) connectivity by encapsulating IPv6 datagram packets within IPv4 User Datagram Protocol (UDP) packets. Teredo routes these datagrams on the IPv4 Internet and through NAT devices. Teredo nodes elsewhere on the IPv6 network (called Teredo relays) receive the packets, un-encapsulate them, and pass them on.

Teredo is a temporary measure. In the long term, all IPv6 hosts should use native IPv6 connectivity. Teredo should be disabled when native IPv6 connectivity becomes available. Christian Huitema developed Teredo at Microsoft, and the IETF standardized it as RFC 4380. The Teredo server listens on UDP port 3544.

Purpose

6to4, the most common IPv6 over IPv4 tunneling protocol, requires that the tunnel endpoint have a public IPv4 address. However, many hosts currently attach to the IPv4 Internet through one or several NAT devices, usually because of IPv4 address shortage. In such a situation, the only available public IPv4 address is assigned to the NAT device, and the 6to4 tunnel endpoint must be implemented on the NAT device itself. Many NAT devices currently deployed, however, cannot be upgraded to implement 6to4, for technical or economic reasons.

Teredo alleviates this problem by encapsulating IPv6 packets within UDP/IPv4 datagrams, which most NATs can forward properly. Thus, IPv6-aware hosts behind NATs can serve as Teredo tunnel endpoints even when they don't have a dedicated public IPv4 address. In effect, a host that implements Teredo can gain IPv6 connectivity with no cooperation from the local network environment.

In the long term, all IPv6 hosts should use native IPv6 connectivity. The temporary Teredo protocol includes provisions for a sunset procedure: Teredo implementation should provide a way to stop using Teredo connectivity when IPv6 matures and connectivity becomes available using a less brittle mechanism. As of IETF89, Microsoft plans to deactivate their Teredo servers for Windows clients in the first half of 2014 (exact date TBD), and encourage the deactivation of publicly operated Teredo relays.

Overview

For a complete explanation, see Teredo Overview in External links.

The Teredo protocol performs several functions:

  1. Diagnoses UDP over IPv4 (UDPv4) connectivity and discovers the kind of NAT present (using a simplified replacement to the STUN protocol)
  2. Assigns a globally routable unique IPv6 address to each host using it
  3. Encapsulates IPv6 packets inside UDPv4 datagrams for transmission over an IPv4 network (this includes NAT traversal)
  4. Routes traffic between Teredo hosts and native (or otherwise non-Teredo) IPv6 hosts

Node types

Teredo defines several different kinds of nodes:

Teredo client
A host that has IPv4 connectivity to the Internet from behind a NAT and uses the Teredo tunneling protocol to access the IPv6 Internet. Teredo clients are assigned an IPv6 address that starts with the Teredo prefix (2001::/32).[1]
Teredo server
A well-known host used for initial configuration of a Teredo tunnel. A Teredo server never forwards any traffic for the client (apart from IPv6 pings), and has therefore modest bandwidth requirements (a few hundred bits per second per client at most), which means a single server can support many clients. Additionally, a Teredo server can be implemented in a fully stateless manner, thus using the same amount of memory regardless of how many clients it supports.
Teredo relay
The remote end of a Teredo tunnel. A Teredo relay must forward all of the data on behalf of the Teredo clients it serves, with the exception of direct Teredo client to Teredo client exchanges. Therefore, a relay requires a lot of bandwidth and can only support a limited number of simultaneous clients. Each Teredo relay serves a range of IPv6 hosts (e.g. a single campus/company, an ISP or a whole operator network, or even the whole IPv6 Internet); it forwards traffic between any Teredo clients and any host within said range.
Teredo host-specific relay
A Teredo relay whose range of service is limited to the very host it runs on. As such, it has no particular bandwidth or routing requirements. A computer with a host-specific relay uses Teredo to communicate with Teredo clients, but sticks to its main IPv6 connectivity provider to reach the rest of the IPv6 Internet.

IPv6 addressing

Each Teredo client is assigned a public IPv6 address, which is constructed as follows (the higher order bit is numbered 0):

Teredo IPv6 addressing table

Bits 0 - 31 32 - 63 64 - 79 80 - 95 96 - 127
Length 32 bits 32 bits 16 bits 16 bits 32 bits
Description Prefix Teredo
server IPv4 		Flags Obfuscated
UDP port 		Obfuscated Client
public IPv4

As an example, the IPv6 address 2001:0000:4136:e378:8000:63bf:3fff:fdd2 refers to a Teredo client that:

Teredo IPv6 example table

Bits 0 - 31 32 - 63 64 - 79 80 - 95 96 - 127
Length 32 bits 32 bits 16 bits 16 bits 32 bits
Description Prefix Teredo
server IPv4 		Flags Obfuscated
UDP port 		Obfuscated Client
public IPv4
Part 2001:0000 4136:e378 8000 63bf 3fff:fdd2
Decoded 65.54.227.120 cone NAT 40000 192.0.2.45

There is a JavaScript Teredo-IP address calculator available.

Servers

For a list of existing Teredo servers, see the list in External links.

Teredo clients use Teredo servers to autodetect the kind of NAT they are behind (if any), through a simplified STUN-like qualification procedure. Teredo clients also maintain a binding on their NAT toward their Teredo server by sending a UDP packet at regular intervals. That ensures that the server can always contact any of its clients—which is required for NAT hole punching to work properly.

If a Teredo relay (or another Teredo client) must send an IPv6 packet to a Teredo client, it first sends a Teredo bubble packet to the client's Teredo server, whose IP address it infers from the Teredo IPv6 address of the Teredo client. The server then forwards the bubble to the client, so the Teredo client software knows it must do hole punching toward the Teredo relay.

Teredo servers can also transmit ICMPv6 packet from Teredo clients toward the IPv6 Internet. In practice, when a Teredo client wants to contact a native IPv6 node, it must locate the corresponding Teredo relay, i.e., to which public IPv4 and UDP port number to send encapsulated IPv6 packets. To do that, the client crafts an ICMPv6 Echo Request (ping) toward the IPv6 node, and sends it through its configured Teredo server. The Teredo server de-capsulates the ping onto the IPv6 Internet, so that the ping should eventually reach the IPv6 node. The IPv6 node should then reply with an ICMPv6 Echo Reply, as mandated by RFC 2460. This reply packet is routed to the closest Teredo relay, which — finally — tries to contact the Teredo client.

Maintaining a Teredo server requires little bandwidth, because they are not involved in actual transmission and reception of IPv6 traffic packets. Also, it does not involve any access to the Internet routing protocols. The only requirements for a Teredo server are:

Public Teredo servers:

Relays

A Teredo relay potentially requires much network bandwidth. Also, it must export (advertise) a route toward the Teredo IPv6 prefix (2001::/32) to other IPv6 hosts. That way, the Teredo relay receives traffic from the IPv6 hosts addressed to any Teredo client, and forwards it over UDP/IPv4. Symmetrically, it receives packets from Teredo clients addressed to native IPv6 hosts over UDP/IPv4 and injects those into the native IPv6 network.

In practice, network administrators can set up a private Teredo relay for their company or campus. This provides a short path between their IPv6 network and any Teredo client. However, setting up a Teredo relay on a scale beyond that of a single network requires the ability to export BGP IPv6 routes to the other autonomous systems (AS's).

Unlike 6to4, where the two halves of a connection can use different relays, traffic between a native IPv6 host and a Teredo client uses the same Teredo relay, namely the one closest to the native IPv6 host network-wise. The Teredo client cannot localize a relay by itself (since it cannot send IPv6 packets by itself). If it needs to initiate a connection to a native IPv6 host, it sends the first packet through the Teredo server, which sends a packet to the native IPv6 host using the client's Teredo IPv6 address. The native IPv6 host then responds as usual to the client's Teredo IPv6 address, which eventually causes the packet to find a Teredo relay, which initiates a connection to the client (possibly using the Teredo server for NAT piercing). The Teredo Client and native IPv6 host then use the relay for communication as long as they need to. This design means that neither the Teredo server nor client needs to know the IPv4 address of any Teredo relays. They find a suitable one automatically via the global IPv6 routing table, since all Teredo relays advertise the network 2001::/32.

For near-realtime information on Teredo and BGP, see the External links.

On March 30, 2006, Italian ISP ITGate was the first AS to start advertising a route toward 2001::/32 on the IPv6 Internet, so that RFC 4380-compliant Teredo implementations would be fully usable. As of 16 February 2007, it is no longer functional.

In Q1 2009, IPv6 backbone Hurricane Electric enabled 14 Teredo relays[2] in an anycast implementation and advertising 2001::/32 globally. The relays were located in Seattle, Fremont, Los Angeles, Chicago, Dallas, Toronto, New York, Ashburn, Miami, London, Paris, Amsterdam, Frankfurt, and Hong Kong.

It is expected that large network operators will maintain Teredo relays. As with 6to4, it remains unclear how well the Teredo service will scale up if a large proportion of Internet hosts start using IPv6 through Teredo in addition to IPv4. While Microsoft has operated a set of Teredo servers since they released the first Teredo pseudo-tunnel for Windows XP, they have never provided a Teredo relay service for the IPv6 Internet as a whole.

Limitations

Teredo is not compatible with all NAT devices. Using the terminology of RFC 3489, it supports full cone, restricted, and port-restricted NAT devices, but does not support symmetric NATs. The original Shipworm specification that led to the final Teredo protocol also supported symmetric NATs, but dropped that due to security concerns.

People at the National Chiao Tung University in Taiwan later proposed SymTeredo, which enhanced the original Teredo protocol to support symmetric NATs, and the Microsoft and Miredo implementations implement certain unspecified non-standard extensions to improve support for symmetric NATs. However, connectivity between a Teredo client behind a symmetric NAT, and a Teredo client behind a port-restricted or symmetric NAT remains seemingly impossible.

Indeed, Teredo assumes that when two clients exchange encapsulated IPv6 packets, the mapped/external UDP port numbers they use are the same used to contact the Teredo server (and build the Teredo IPv6 address). Without this assumption, it would not be possible to establish a direct communication between the two clients, and a costly relay would have to perform triangular routing. A Teredo implementation tries to detect the type of NAT at startup, and refuses to operate if the NAT appears symmetric. (This limitation can sometimes be worked around by manually configuring a port forwarding rule on the NAT box, which requires administrative access to the device).

Teredo can only provide a single IPv6 address per tunnel endpoint. As such, it is not possible to use a single Teredo tunnel to connect multiple hosts, unlike 6to4 and some point-to-point IPv6 tunnels. The bandwidth available to all Teredo clients toward the IPv6 Internet is limited by the availability of Teredo relays, which are no different than 6to4 relays in that respect.

Alternatives

6to4 requires a public IPv4 address, but provides a large 48-bit IPv6 prefix for each tunnel endpoint, and has a lower encapsulation overhead. Point-to-point tunnels can be more reliable and are more accountable than Teredo, and typically provides permanent IPv6 addresses that do not depend on the IPv4 address of the tunnel endpoint. Some point-to-point tunnel brokers also support UDP encapsulation to traverse NATs (for instance, the AYIYA protocol can do this). On the other hand, point-to-point tunnels normally require registration. Automated tools (for instance AICCU) make it easy to use Point-to-Point tunnels.

Security considerations

Exposure

Teredo increases the attack surface by assigning globally routable IPv6 addresses to network hosts behind NAT devices, which could otherwise be unreachable from the Internet. By doing so, Teredo potentially exposes any IPv6-enabled application with an open port to the outside. Teredo tunnel encapsulation can mask the contents, of the IPv6 data traffic, from packet inspection, enabling the spread, of both IPv6, and even some IPv4 malware.[3] US CERT has published a paper, on the risks of malware using IPv6 tunneling.[4] Teredo also exposes the IPv6 stack and the tunneling software to attacks should they have any remotely exploitable vulnerability.

The Microsoft IPv6 stack has a "protection level" socket option. This allows applications to specify whether they are willing to handle traffic coming from the Teredo tunnel, from anywhere except Teredo (the default), or only from the local Intranet.

The Teredo protocol, also, encapsulates detailed information, about the tunnel's endpoint, in data packets.[5]

Firewalling, filtering, and blocking

For a Teredo pseudo-tunnel to operate properly, outgoing UDP packets must be unfiltered. Moreover, replies to these packets (i.e., "solicited traffic") must also be unfiltered. This corresponds to the typical setup of a NAT and its stateful firewall functionality. Teredo tunneling software detects a fatal error and stops if outgoing IPv4 UDP traffic is blocked. Also, blocking of outgoing traffic to UDP port 3544 can interfere with Teredo activity.

DoS via routing loops

Recently, new methods to create denial of service attacks via routing loops that use Teredo tunnels have been uncovered. They are relatively easy to prevent.[6]

Enabled by Default

Current versions, of Microsoft operating systems enable IPv6 transitional technologies, including Teredo, by default. Disabling these transitional technologies is possible, from a command prompt, by registry edit, or using group policy, if IPv6 is not implemented, on the corporate network. Due to Microsoft's default enabled, for IPv6 and related transitional technologies, non-obvious configuration settings are needed, in fresh Windows OS installations, to avoid the growing threat, of IPv6 enabled malware.[7]

Implementations

Several implementations of Teredo are currently available:

Choice of the name

The initial nickname of the Teredo tunneling protocol was shipworm. The idea was that the protocol would pierce holes through NAT devices, much like the shipworms bore tunnels through wood. Shipworms are responsible for the loss of very many wooden hulls, but Christian Huitema, in the original draft, noted that, "The animal only survives in relatively clean and unpolluted water; its recent comeback in several Northern American harbors is a testimony to their newly retrieved cleanliness. Similarly, by piercing holes through NAT, the service would contribute to a newly retrieved transparency of the Internet."

Christian Huitema changed the name to Teredo to avoid confusion with computer worms.[10] Teredo navalis is the Latin name of one of the best known species of shipworm.

References

  1. ↑ http://msdn.microsoft.com/en-us/library/windows/desktop/cc136764(v=vs.85).aspx
  2. ↑ Levy, Martin (May 28, 2009). "Hurricane Electric's experience in deploying Teredo and 6to4 relays" (PDF). LACNIC-XII/FLIP6 2009 Conference, Panama City, Panama.
  3. ↑ "Malware Tunneling in IPv6 | US-CERT". www.us-cert.gov. Retrieved 2016-09-05.
  4. ↑ "Malware Tunneling in IPv6 | US-CERT". www.us-cert.gov. Retrieved 2016-09-05.
  5. ↑ "IPv6 Tunneling Protocols: Good for Adoption, Not So Hot for Security - TrendLabs Security Intelligence Blog". 2009-10-26. Retrieved 2016-09-05.
  6. ↑ Gont, Fernando (September 8, 2010). "Internet-Draft - Teredo routing loops - Mitigating Teredo Rooting Loop Attacks". ietf.org. p. 2.
  7. ↑ Perschke, Susan. "Hackers target IPv6". Retrieved 2016-09-05.
  8. ↑ Kabassanov, Konstantin; Jardin, Vincent. (October 22, 2003). Teredo for FreeBSD www-rp.lip6.fr.
  9. ↑ "Solomon, Aaron". (November 29, 2004). NICI-Teredo. Sourceforge.
  10. ↑ Huitema, Christian (December 19, 2001). "(ngtrans) Renaming Shipworm as Teredo?". IETF ngtrans wg mailing list.

External links

This article is issued from Wikipedia - version of the 10/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.