T-nut

For the hold down type of fastener used for work-holding in machine tools, see T-slot nut.
T-nuts. The left one has been inserted in the wood and a bolt has been screwed in from the other side.

A T-nut, T nut, or tee nut (also known as a blind nut,[1] which can however also refer to a rivet nut or an insert nut) is a type of nut used to fasten a wood, particle or composite materials workpiece, leaving a flush surface.

It has a long, thin body and a flange at one end, resembling a T in profile. The flanges of T-nuts often have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.

In 1969, the first four-prong T-nut with the eight-sided base was patented. Unlike the standard round base T-nuts, the eight-sided T-nuts can be fed efficiently and reliably via machine. The eight-sided T-nut base has become the standard configuration for T-nuts inserted by machine.[2][3][4]

See also

References

Wikimedia Commons has media related to Tee nuts.
  1. ↑ Airfield Models - Threaded Fasteners used in Model Airplanes
  2. ↑ US 3480061, Leistner, Walter Hermann, "Fastener member", issued 1969-11-25.
  3. ↑ Our history, retrieved 2009-10-21.
  4. ↑ About Sigma, retrieved 2009-10-21.
This article is issued from Wikipedia - version of the 9/5/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.