Swiss coordinate system

The Swiss coordinate system (or Swiss grid) is a geographic coordinate system used in Switzerland for maps and surveying by the Swiss Federal Office of Topography (Swisstopo).

The map projection used is Oblique Mercator on an 1841 Bessel ellipsoid.

The geodetic datum CH1903 (SRID 21781) uses as fundamental point the old observatory of Bern (46°57′3.9″N 7°26′19.1″E / 46.951083°N 7.438639°E / 46.951083; 7.438639 (WGS84)), the current location of the Institut für exakte Wissenschaften of the University of Bern. In order to avoid errors during coordinate transmissions, the coordinates of this point are 600'000 m E / 200'000 m N. The 0 / 0 coordinate is located near Bordeaux, France. Though E coordinate is denoted as y and N coordinate x, E coordinate is the first axis of this Cartesian system, namely a point is denoted as (y, x). As an example, the observatory is (600'000, 200'000). This definition invokes the following effects:

The CH1903+ datum is a refinement and improvement of CH1903. It is based on WGS84, and it was devised for the national land survey of 1995 (LV 95 for Landesvermessung 1995). The coordinates of its new reference point, the Zimmerwald Observatory, should maintain the CH1903 coordinates as far as possible - the maximum shift between the two datums is 3 metres on the ground, so most map and GPS users will not notice any difference. The easting and northing is increased by 2 and 1 million, respectively, resulting in 14-digit rather than 12-digit metre coordinates.

Example: coordinates of the Zimmerwald observatory in the old and new notations:
CH1903 y = 602 030.68 m x = 191 775.03 m
CH1903+ E = 2 602 030.74 m N = 1 191 775.03 m

See also

External links


This article is issued from Wikipedia - version of the 8/8/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.