Subaru R1

Subaru R1
Overview
Also called	Subaru R1e
Production	2005 - 2010
Body and chassis
Class	Kei car
Related	Subaru R2
Powertrain
Engine	658cc EN07U I 4 658cc EN07D DOHC AVCS I 4 658cc EN07X DOHC I 4 supercharged (STi)
Transmission	iCVT
Dimensions
Wheelbase	2,195 mm (86.4 in)
Length	3,285 mm (129.3 in)
Width	1,475 mm (58.1 in)
Height	1,510 mm (59.4 in)
Curb weight	800 kg (1,763.7 lb)

The Subaru R1 was introduced by the Japanese carmaker Subaru on January 4, 2005. It was designed to fit within the Japanese kei car tax bracket.

The R1 is a two-door version of the Subaru R2, but with a shorter body and wheelbase. The R1 is unusual in that it does not use up the maximum length allowed for by the kei car regulations—the only other kei cars to have done this since the 1989 Autozam Carol were the Suzuki Twin and the European Smart Fortwo.

The R1 was only available in one spec level up to the end of 2005, using a 658cc Subaru EN engine. The engine is available in three versions: the I with the EN07U SOHC 34 kW (roughly 46 horsepower) engine, the R with the EN07D DOHC engine rated at 40 kW (54 horsepower) and the STi with an EN07X supercharged and intercooled engine rated at 47 kW (63 horsepower). The R1 is being marketed as a personal car and as a middle-aged couple's second car; a combination of leather and alcantara seating is available. All R1s are equipped with a CVT, and all trim levels are available with front-wheel drive as well as four-wheel drive.

In its promotional materials, the R1 is frequently compared to the Subaru 360, the first production Subaru automobile.

The R1 is the base car for several vehicles:

• The Subaru R1e, an experimental battery electric vehicle, currently undergoing limited production for selected industrial clients in Japan. There is intense interest in this vehicle within the US EV community as it employs Lithium Ion batteries which contribute to a significant improvement in range, and which can be 80% recharged in just 15 minutes.
• The Prodrive P2 concept sports car.^[1]

Collectibles

• Tomica makes a diecast 1/64 R1, not available in US.
• Takara makes a Choro Q plastic pull-back R1 not available in US.

References

Wikimedia Commons has media related to Subaru R1.