South African Class 8D 4-8-0

This article is about one of several different Cape Government Railways locomotive types to be designated "8th Class". For other CGR 8th Class locomotives, see Cape Government Railways 8th Class locomotives.
CGR 8th Class 4-8-0 1903
South African Classes 8D & 8DW 4-8-0

CGR 8th Class no. 788, SAR Class 8D no. 1223, Bloemfontein, 22 March 1970
Type and origin
♠ Original locomotive, as built
Superheated, outside admission valves
Superheated, inside admission valves, Class 8DW
Power type Steam
Designer Cape Government Railways
(H.M. Beatty)
Builder Neilson, Reid and Company
North British Locomotive Company
Serial number NR 6284-6301, 6303-6308, 6325-6334
NBL 15833-15836
Model CGR 8th Class (4-8-0)
Build date 1902-1903
Total produced 38
Specifications
Configuration 4-8-0 (Mastodon)
Driver 2nd coupled axle
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Leading dia. 28 12 in (724 mm)
Coupled dia. 48 in (1,219 mm)
Tender wheels 33 12 in (851 mm) as built
34 in (864 mm) retyred
Wheelbase 46 ft 10 12 in (14,288 mm)
  Engine 23 ft 3 in (7,087 mm)
  Leading 6 ft (1,829 mm)
  Coupled 13 ft 6 in (4,115 mm)
  Tender 14 ft 7 in (4,445 mm)
  Tender bogie 4 ft 7 in (1,397 mm)
Length:
  Over couplers 54 ft 2 14 in (16,516 mm)
Height ♠ 12 ft 10 in (3,912 mm)
12 ft 8 in (3,861 mm)
Frame type Bar
Axle load ♠ 11 LT 14 cwt (11,890 kg)
12 LT (12,190 kg)
12 LT 11 cwt (12,750 kg)
  Leading ♠ 12 LT 9 cwt (12,650 kg)
12 LT 15 cwt (12,950 kg)
  Coupled ♠ 11 LT 14 cwt (11,890 kg) all
12 LT (12,190 kg) all
  1st coupled 11 LT 18 cwt (12,090 kg)
  2nd coupled 12 LT 11 cwt (12,750 kg)
  3rd coupled 11 LT 19 cwt (12,140 kg)
  4th coupled 11 LT 18 cwt (12,090 kg)
  Tender bogie Bogie 1: 17 LT 13 cwt (17,930 kg)
Bogie 2: 18 LT 16 cwt (19,100 kg)
  Tender axle 9 LT 8 cwt (9,551 kg)
Adhesive weight ♠ 46 LT 16 cwt (47,550 kg)
48 LT (48,770 kg)
48 LT 6 cwt (49,080 kg)
Loco weight ♠ 59 LT 5 cwt (60,200 kg)
60 LT 15 cwt (61,720 kg)
61 LT 1 cwt (62,030 kg)
Tender weight 36 LT 9 cwt (37,030 kg)
Total weight ♠ 95 LT 14 cwt (97,240 kg)
97 LT 4 cwt (98,760 kg)
97 LT 10 cwt (99,060 kg)
Tender type XE1 (2-axle bogies)
XC, XC1, XD, XE, XE1, XF, XF1, XF2, XJ, XM, XM1, XM2, XM3 permitted
Fuel type Coal
Fuel capacity 10 LT (10.2 t)
Water cap 2,855 imp gal (13,000 l)
Firebox type Round-top
  Firegrate area ♠ 21.35 sq ft (1.983 m2)
21 sq ft (2.0 m2)
Boiler:
  Pitch 7 ft 1 in (2,159 mm)
  Diameter 5 ft (1,524 mm)
  Tube plates ♠ 11 ft 12 in (3,366 mm)
11 ft 38 in (3,362 mm)
  Small tubes205: 2 in (51 mm)
115: 2 in (51 mm)
  Large tubes 18: 5 12 in (140 mm)
Boiler pressure 180 psi (1,241 kPa)
Safety valve Ramsbottom
Heating surface ♠ 1,318 sq ft (122.4 m2)
1,081 sq ft (100.4 m2)
  Tubes ♠ 1,185 sq ft (110.1 m2)
950 sq ft (88 m2)
  Firebox ♠ 133 sq ft (12.4 m2)
131 sq ft (12.2 m2)
Superheater:
  Heating area 214 sq ft (19.9 m2)
Cylinders Two
Cylinder size18 12 in (470 mm) bore
19 in (483 mm) bore
20 in (508 mm) bore
24 in (610 mm) stroke
Valve gear Stephenson
Valve type ♠ Slide - Piston
Couplers Bell link-and-pin
AAR knuckle (c. 1930s-1950s)
Performance figures
Tractive effort ♠ 23,110 lbf (102.8 kN) @ 75%
24,370 lbf (108.4 kN) @ 75%
27,000 lbf (120 kN) @ 75%
Career
Operators Cape Government Railways
South African Railways
Class CGR 8th Class, SAR Classes 8D & 8DW
Number in class 38
Numbers CGR 366-384, 399, 783-794, 807-812
SAR 1192-1229
Delivered 1903
First run 1903
Withdrawn 1972
The leading coupled axle had flangeless wheels

The South African Railways Class 8D 4-8-0 of 1903 was a steam locomotive from the pre-Union era in the Cape of Good Hope.

In 1903, when the first batch of 8th Class 4-8-0 Mastodon type locomotives had been tried and proven successful, the Cape Government Railways placed another thirty-eight 8th Class 4-8-0 steam locomotives in service, six on the Western System, twenty on the Midland System and twelve on the Eastern System. In 1912, when they were assimilated into the South African Railways, they were renumbered and reclassified to Class 8D.[1][2][3]

Manufacture

Evolution

The first 8th Class locomotive of the Cape Government Railways (CGR) was a 2-8-0 Consolidation type, designed by H.M. Beatty, the Chief Locomotive Superintendent of the CGR from 1896 to 1910. It was later to become the South African Railways (SAR) Class 8X.[2]

H.M. Beatty

While these first Schenectady- and ALCO-built 2-8-0 locomotives were being subjected to exhaustive testing on all types of traffic and under varying conditions, some trouble was experienced with the leading two-wheeled pony truck. When designs were prepared at Salt River for a later order for more locomotives, the pony truck was replaced with a four-wheeled bogie.[2]

These thirty-eight locomotives were the second batch of CGR 8th Class locomotives to be built with a 4-8-0 Mastodon type wheel arrangement. In spite of the difference in wheel arrangement, the CGR's new post-7th Class Consolidations and Mastodons were all grouped together into the 8th Class.[1][2]

Builders

They were ordered from Neilson, Reid and Company in 1902 and were delivered in four batches in 1903. While they were being built, Neilson, Reid amalgamated with Dübs and Company and Sharp, Stewart and Company to form the North British Locomotive Company (NBL). As a result, the last four of these locomotives were delivered as having been built by NBL, at the Hyde Park shops of the former Neilson, Reid.[2][4][5]

The locomotives were delivered with Type XE1 tenders and distributed between the CGR's Midland, Eastern and Western systems as follows:

Class 8 sub-classes

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways required careful planning and was only implemented with effect from 1 January 1912.[3][7][8]

In 1912, these 38 locomotives were renumbered in the range from 1192 to 1229 and designated Class 8D on the South African Railways (SAR).[6]

These locomotives, together with the rest of the CGR's 8th Class 2-8-0 Consolidations and 8th Class 4-8-0 Mastodons, as well as the Class 8-L1 to 8-L3 4-8-0 Mastodon locomotives from the Central South African Railways (CSAR), were grouped into ten different sub-classes by the SAR. The 4-8-0 locomotives became SAR Classes 8 and 8A to 8F and the 2-8-0 locomotives became Classes 8X to 8Z.[9]

Modification

During A.G. Watson's term as the Chief Mechanical Engineer of the SAR from 1929 to 1936, many of the Class 8 to Class 8F locomotives were equipped with superheated boilers, larger bore cylinders and either inside or outside admission piston valves. The outside admission valve locomotives had their cylinder bore increased from 18 12 inches (470 millimetres) to 19 inches (483 mm) and retained their existing SAR classifications, while the inside admission valve locomotives had their cylinder bore increased to 20 inches (508 millimetres) and were reclassified by having a "W" suffix added to their existing SAR classifications.[1][9]

Of the Class 8D locomotives, nine were equipped with superheated boilers, 19 inches (483 millimetres) bore cylinders and outside admission piston valves, while retaining their Class 8D classification.[9]

Fourteen were equipped with superheated boilers, 20 inches (508 millimetres) bore cylinders and inside admission piston valves, and were reclassified to Class 8DW.[9]

The Class 8D and Class 8DW locomotive builders, works numbers, CGR to SAR renumbering and superheating modifications are listed in the table.[3][4][5][9]

Service

In SAR service, the 4-8-0 Class 8 family of locomotives served on every system in the country and, in the 1920s, became the mainstay of motive power on many branchlines. Their final days were spent in shunting service and, by 1972, they were all withdrawn.[1]

Some were sold into industrial service after withdrawal, like no. 1211, which became Puffing Duggie at Grootvlei Proprietary Mines (GVPM).[1][10]

Illustration

The main picture shows reboilered and modified SAR Class 8D no. 1223 at the Bloemfontein locomotive depot on 22 March 1970. In the first picture below, the same locomotive is depicted before the modification.

References

  1. 1 2 3 4 5 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 48–49. ISBN 0869772112.
  2. 1 2 3 4 5 6 Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 63–64. ISBN 978-0-7153-5382-0.
  3. 1 2 3 Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, pp. 9, 12, 15, 42-43 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  4. 1 2 Neilson, Reid works list, compiled by Austrian locomotive historian Bernhard Schmeiser
  5. 1 2 North British Locomotive Company works list, compiled by Austrian locomotive historian Bernhard Schmeiser
  6. 1 2 Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. p. 139. ISBN 978-0-7153-5427-8.
  7. The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
  8. South Africa Act, 1909, enacted by the Parliament of the United Kingdom, 20 September 1909
  9. 1 2 3 4 5 South African Railways and Harbours Locomotive Diagram Book, 2'0" & 3'6" Gauge Steam Locomotives, 15 August 1941, as amended
  10. Middleton, John N. (2002). Railways of Southern Africa Locomotive Guide - 2002 (as amended by Combined Amendment List 4, January 2009) (2nd, Dec 2002 ed.). Herts, England: Beyer-Garratt Publications. pp. 14, 19.
Wikimedia Commons has media related to South African Class 8D (4-8-0).
This article is issued from Wikipedia - version of the 5/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.