Silicon nanotube

Si nanotube (top) created by partial etching of Si-covered ZnO nanowire (bottom).[1]
Si nanotubes created by etching of Si-covered ZnO nanowires.[1]

Silicon nanotubes are nanoparticles which create a tube-like structure from silicon atoms. As with Silicon Nanowires, they are technologically important due to their unusual physical properties, which differ fundamentally to those of bulk silicon.[2] First reports on silicon nanotubes appeared around the year 2000.[3]

Synthesis

One method to prepare silicon nanotubes is using a reactor employing an electric arc without the use of any catalyst.[4] To ensure purity, the reactor is evacuated and filled with the nonreactive noble gas argon. The actual formation of the nanotubes relies on the process of chemical vapor deposition.[5]

A more common laboratory-scale method involves using germanium or zinc oxide nanowires as a template. Silicon, coming typically from either silane or silicon tetrachloride gas, is then deposited onto the nanowires, and the core is dissolved leaving behind a silicon tube.[6] The growth of template nanowires, silicon deposition and nanowire etching, and consequently the geometry of resulting Si nanotubes, can be accurately controlled in the second method; however, the smallest inner diameter is limited by tens of nanometers.[1]

The conventional vapor-liquid-solid (VLS) and solid-liquid-solid (SLS) mechanisms are favorite techniques to grow one-dimensional silicon nanostructures. However, they usually incorporate only one type of metal as catalyst and therefore can not be used for growing tubular (hollow) silicon nanostructures. In a recent attempt, a nickel-gold bilayer catalyst layer has been used to take the advantage of the uneven growth rate of constituent metal catalysts. Using these modified VLS and SLS techniques, multiwall silicon nanotubes with a sidewall thickness of few nanometers have been grown.[7]

Applications

Silicon nanotubes and nanowires have been considered for use in electronics. Since the structure can accommodate molecules of hydrogen so it might resemble coal without the CO2, it appears that silicon nanomaterials may behave like a metal fuel.[8][9] A silicon nanotube charged with hydrogen delivers energy and in the process leaves residual water, ethanol, silicon and sand. However, as hydrogen production requires considerable energy, this is only a proposed method of storing energy, not producing it.

Silicon nanotubes and Silicon Nanowires can be used in lithium-ion batteries. Conventional Li-ion batteries use graphitic carbon as the anode, but replacing this with silicon nanotubes experimentally increases the specific (by mass) anode capacity by a factor of 10 (though the overall capacity improvement is lower due to the far lower specific cathode capacities).[10]

Another emerging application of silicon nanotube is light emission. Since silicon is an indirect band gap semiconductor, the quantum yield of radiative recombination in this material is very low. As the thickness of silicon-based nanostructures reduces below the effective Bohr radius (about 9 nm, in silicon) the quantum efficiency of light emission from this material increases owing to the quantum confinement effect. Relying on this fact, photoemission capability of silicon nanotubes with very thin sidewalls has been demonstrated.[7]

References

  1. 1 2 3 Huang, Xuezhen; Gonzalez-Rodriguez, Roberto; Rich, Ryan; Gryczynski, Zygmunt; Coffer, Jeffery L. (2013). "Fabrication and size dependent properties of porous silicon nanotube arrays". Chemical Communications. 49 (51): 5760. doi:10.1039/C3CC41913D. PMID 23695426.
  2. ↑ Mu, C.; Zhao, Q.; Xu, D.; Zhuang, Q.; Shao, Y. (2007). "Silicon Nanotube Array/Gold Electrode for Direct Electrochemistry of Cytochrome c". Journal of Physical Chemistry B. 111 (6): 1491. doi:10.1021/jp0657944.
  3. ↑ Kiricsi, Imre; Fudala, Ágnes; Kónya, Zoltán; Hernádi, Klára; Lentz, Patrick; Nagy, János B (2000). "The advantages of ozone treatment in the preparation of tubular silica structures". Applied Catalysis A: General. 203: L1. doi:10.1016/S0926-860X(00)00563-9.
  4. ↑ De Crescenzi, M.; Castrucci, P.; Scarselli, M.; Diociaiuti, M.; Chaudhari, P. S.; Balasubramanian, C.; Bhave, T. M.; Bhoraskar, S. V. (2005). "Experimental imaging of silicon nanotubes". Applied Physics Letters. 86 (23): 231901. doi:10.1063/1.1943497.
  5. ↑ Sha, J.; Niu, J.; Ma, X.; Xu, J.; Zhang, X.; Yang, Q.; Yang, D. (2002). "Silicon Nanotubes". Advanced Materials. 14 (17): 1219. doi:10.1002/1521-4095(20020903)14:17<1219::AID-ADMA1219>3.0.CO;2-T.
  6. ↑ Moshit, Ishai; Patolsky, Fernando (2009). "Shape- and Dimension-Controlled Single-Crystalline Silicon and SiGe Nanotubes: Toward Nanofluidic FET Devices". Journal of the American Chemical Society. 131 (10): 3679–3689. doi:10.1021/ja808483t.
  7. 1 2 Taghinejad, Mohammad; Taghinejad, Hossein (2012). "A Nickel−Gold Bilayer Catalyst Engineering Technique for Self-Assembled Growth of Highly Ordered Silicon Nanotubes (SiNT)". Nano Letters. 13 (3): 889–897. doi:10.1021/nl303558f.
  8. ↑ Zeng, Xiao Cheng; Tanaka, Hideki (May 10, 2004). "Scientists Model Silicon Nanotubes That Appear to Be Metal (AzO Nanotechnology)". AZoNano.
  9. ↑ Bardsley, Earl (April 2009). "The sand option: Energy from silicon" (PDF). Australian R&D Review.
  10. ↑ McDermott, Mat. (2009-09-23) Li-Ion Battery Breakthrough: Silicon Nanotubes Boost Capacity 10x. TreeHugger. Retrieved on 2015-11-13.
Wikimedia Commons has media related to Silicon nanotubes.
This article is issued from Wikipedia - version of the 10/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.