Selenium hexafluoride

Selenium hexafluoride
Names
IUPAC name
Selenium hexafluoride
Other names
Selenium(VI) fluoride, Selenium fluoride
Identifiers
7783-79-1 YesY
3D model (Jmol) Interactive image
ChemSpider 22964 N
ECHA InfoCard 100.149.506
PubChem 24558
RTECS number VS9450000
Properties
SeF6
Molar mass 192.9534 g/mol
Appearance colourless gas
Density 7.887 kg/m3 (g/L)[1]
Melting point −34.6 °C (−30.3 °F; 238.6 K)[1]
Boiling point −46.6 °C (−51.9 °F; 226.6 K) sublimes
insoluble
Vapor pressure >1 atm (20°C)[2]
1.895
Structure
Orthorhombic, oP28
Pnma, No. 62
octahedral (Oh)
0
Thermochemistry
1030 kJ/mol[3]
Hazards
Main hazards toxic, corrosive
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g., phosphorus Special hazards (white): no codeNFPA 704 four-colored diamond
0
3
2
Lethal dose or concentration (LD, LC):
10 ppm (rat, 1 hr)
10 ppm (mouse, 1 hr)
10 ppm (guinea pig, 1 hr)[4]
US health exposure limits (NIOSH):
PEL (Permissible)
 TWA 0.05 ppm (0.4 mg/m3)[2]
REL (Recommended)
 TWA 0.05 ppm[2]
IDLH (Immediate danger)
 2 ppm[2]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Selenium hexafluoride is the inorganic compound with the formula SeF6. It is a colourless gas described as having a "repulsive" odor.[5] It is not widely encountered and has no commercial applications.[6]

Structure, preparation, and reactions

Like many compounds of selenium, SeF6 is hypervalent. The compound has octahedral molecular geometry with an Se−F bond length of 168.8 pm.

SeF6 can be prepared from the elements[7] or by the reaction of bromine trifluoride (BrF3) with selenium dioxide. The crude product is purified by sublimation.

The relative reactivity of the hexafluorides of S, Se, and Te follows the order TeF6 > SeF6 > SF6, the latter being completely inert toward hydrolysis until high temperatures. SeF6 also resists hydrolysis.[3] The gas can be passed through 10% NaOH or KOH without change, but reacts with gaseous ammonia at 200 °C.[8]

Safety

Although selenium hexafluoride is quite inert and slow to hydrolyze, it is toxic even at low concentrations,[9] especially by longer exposure. In the U.S., OSHA and ACGIH standards for selenium hexafluoride exposure is an upper limit of 0.05 ppm in air averaged over an eight-hour work shift. Additionally, selenium hexafluoride is designated as IDLH chemical with a maximum allowed exposure limit of 2 ppm.[10]

References

  1. 1 2 Lide, D. R., ed. (2005). CRC Handbook of Chemistry and Physics (86th ed.). Boca Raton (FL): CRC Press. ISBN 0-8493-0486-5.
  2. 1 2 3 4 "NIOSH Pocket Guide to Chemical Hazards #0551". National Institute for Occupational Safety and Health (NIOSH).
  3. 1 2 Wiberg, E.; Holleman, A. F. (2001). Inorganic Chemistry. Elsevier. ISBN 0-12-352651-5.
  4. ↑ "Selenium hexafluoride". Immediately Dangerous to Life and Health. National Institute for Occupational Safety and Health (NIOSH).
  5. ↑ "Material Safety" (PDF). Retrieved 2010-07-24.
  6. ↑ Langner, B. E. (2005), "Selenium and Selenium Compounds", Ullmann's Encyclopedia of Industrial Chemistry, Weinheim: Wiley-VCH, doi:10.1002/14356007.a23_525
  7. ↑ Yost, D. M.; Simons, J. H. (1939). "Sulfur, Selenium, and Tellurium Hexafluorides". Inorganic Syntheses. 1: 121–122. doi:10.1002/9780470132326.ch44.
  8. ↑ Krebs, B.; Bonmann, S.; Eidenschink, I. (1994). "Selenium-Inorganic Chemistry". In King, R. B. Encyclopedia of Inorganic Chemistry. John Wiley & Sons. ISBN 0-471-93620-0.
  9. ↑ "Medical Management Guidelines for Selenium Hexafluoride (SeF6)". CDC ATSDR. Retrieved 2010-07-24.
  10. ↑ Documentation for Immediately Dangerous To Life or Health Concentrations (IDLHs)
This article is issued from Wikipedia - version of the 11/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.