SZD-21 Kobuz

SZD-21 Kobuz
SZD-21-2B Kobuz 3 in the Polish Aviation Museum
Role Glider
National origin Poland
Manufacturer Glider Works in Wrocław
Design group SZD
First flight 3 June 1961[1]
Number built 30[1]


The SZD-21 Kobuz was a single-seat aerobatic glider designed and built in Poland at Szybowcowy Zakład Doświadczalny (Glider Experimental Works) in Bielsko-Biała from 1958.

Development

The SZD-21 was a successor to the IS-4 Jastrząb. Development began in January 1958 as the SZD-21 Sokół, but due to problems with the flying surfaces and a wood metal sandwich, a construction of the design was restarted as the SZD-21 Kobuz (Eurasian hobby), than SZD-21-2 Kobuz. The new SZD-21-2 retained the overall shape of the original project, but was constructed with wood throughout, using multiple spars for the wings. Design team was headed by Jerzy Trzeciak, later joined by M. Gracz in Kobuz 3 constructing.

Flight testing of the SZD-21 Kobuz began on 3 June 1961 with Stanisław Skrzydlewski at the controls,[2] but the results were disappointing prompting a re-build as the SZD-21-2A, with a completely revised fuselage, landing gear, canopy and differential ailerons. Flight tests resumed on in May 1962, but serious problems with the pitch and roll stability at high speed as well as flutter in a certain speed range prompted a further round of modifications. The resulting SZD-21-2AZ (still registered as SP-1990) continued the test program until 20 April 1963, when the aircraft broke up in flight during flutter testing, killing the pilot Sławomir Makaruk.[1]

The final version, the SZD-21-2B Kobuz 3, which was of all wood construction with very stiff wings to resist bending and flutter, was produced in small numbers in Wrocław. It first flew on 10 December 1964.[2] It competed at the highest levels into the late 1980s. Unfortunately, the Kobuz 3 was not immune to accidents and one high profile fatal accident, at the world glider aerobatic championships at Hockenheim in Germany, highlighted problems with condensation soaking highly stressed wooden parts causing structural failure. The pilot, Krzysztof Wyskiel, was carrying out his competition routine with high accuracy until the penultimate manoeuvre when the wings failed, clapping hands above the fuselage which shot straight down to the ground like an arrow, killing Krzysztof Wyskiel instantly. The three remaining Kobuz 3's in the competition were grounded and remained so until the aircraft were cleared for limited manoeuvres only, curtailing their aerobatic competition careers.

In 1991 the design of a new (composite build) aerobatic glider, S-1 Swift had been finished, based on the Kobuz 3 design (the wings of the first production series of the Swift glider had been manufactured using the wings of Kobus 3 as molds).[3]


Variants

Specifications (SZD-21 Kobuz 3)

Data from http://www.piotrp.de/SZYBOWCE/dszd212b.htm

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era

References

  1. 1 2 3 4 (Polish) Babiejczuk, Janusz and Grzegorzewski, Jerzy. Polski przemysł lotniczy 1945-1973 (Polish aerospace industry 1945-197). Warsaw: Wydawnictwo MON, 1974, p. 126
  2. 1 2 Glass, A. (1965), p. 124-126
  3. ↑ Segel-Kunstflugzeuge Swift S-1
Wikimedia Commons has media related to SZD-21 Kobuz.
This article is issued from Wikipedia - version of the 4/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.