Roland VK-7
The Roland VK-7 is an electronic keyboard introduced in 1997 which simulates the sound of an electromechanical Hammond organ. Like other electronic musical instruments that emulate (or "clone") the sound of the electromechanical tonewheel-based organs formerly manufactured by Hammond, the VK-7 is referred to as a clonewheel organ. Currently it is replaced by the VK-8 and the VK-88.
Since transporting the heavy, vintage electromechanical Hammond organs to performances was cumbersome, there was a strong demand amongst musicians for way of recreating the Hammond sound in a more portable fashion. Refinements to Hammond emulations eventually led to the development of relatively lightweight electronic keyboard instruments such as the Roland VK-09 (1981), KORG BX-3 and CX-3 (1980), Roland VK-7 (1997), and Kurzweil K2600 (1999) that produce a fairly realistic re-creation of the Hammond tone.
Description
The VK-7 is designed to recreate the organ sounds of the 1960s and 1970s jazz and popular music. The instrument has nine harmonic drawbars so that the organist can control the volume of different overtones. The instrument also provides vibrato, chorus, and reverb effects and an overdrive knob, which adds simulated tube amplifier "growl". As with most clonewheel emulator keyboards, the drawbars are positioned to the left of the keyboard. Unlike the Hammond organ, which had two manuals (keyboards), the VK-7 has only a single manual with 61 keys.
Nevertheless, the keyboard can be split into two sections, so that the bass drawbars are applied to the low end of the keyboard, and the nine upper drawbars are applied to the rest of the keyboard. This keyboard-split function allows an organist to perform low-register basslines and high-register chords and solos on a single keyboard. The organist can view the effect and registration settings on a small LCD screen.
As well, the instrument contains an orchestral voice section that can be layered with the organ sounds. The sounds include strings, brasses, choirs, percussion instruments (e.g., glockenspiel) and bass sounds. The keyboard has an 11-pin rotary cabinet connector which allows it to be connected to external rotary speaker, such as a Leslie Speaker. It has MIDI inputs, which means that bass pedal keyboards can be used with the instrument, or an additional MIDI keyboard can be connected to the VK-7 (so that the player can have lower and upper manuals with different pre-set tones set up). The chassis has a wood finish with alder wood sideboards.[1]
Customer Reaction
Hammond organist Brad Coates from Melmusic reviewed the VK-7. He praised the use of real wood in the chassis and the "very solid and substantial" construction, which gave the instrument an authentic "feel." He praised the ergonomics and layout of the instrument, stating that "The presets and LCD screen are perfectly positioned centre rear of the keys." As well, he noted that "The drawbars feel smooth and positive and are situated a comfortable 3 cms [sic] in from the left-hand end cheek." He argues that Roland should not have placed the volume and reverb knobs on the right side of the keyboard, because the organist must stop playing their right-hand chords or melody to change the volume. He stated that the keyboard "feels nice and positive but lacks those rounded, chop edge keys that make palming [palm glissandos] such a pleasure on the B3." [2]
He praised the Hammond organ sound on the VK-7, noting that when he conducted a double-blind test comparison with a vintage Hammond organ in his house, they both sounded very similar. He stated that the tone generation, which uses physical modelling technology had "none of that cold, unfeeling digital glassiness" found on other clonewheel organs. He found problems with the symphonic voices, however, and stated that are "they are not real great in a live situation", and he criticized the lack of an acoustic piano sound. In all, though, he stated that he was very impressed with the VK-7, calling it a "real player’s instrument". [2]
The Roland VK-7, like many other Roland keyboards of the mid to late 1990's and early 2000's, suffers from a manufacturing defect commonly known as the "red glue problem" or the "pink goo" issue. The keys on Roland's keyboards of this era had weights glued into them to create a nice feel for the performer. The weights were glued to the underside of the keys using an epoxy glue that was red/pink in color. Over time and when exposed to heat, the glue broke down causing the glue to seep into the keyboard action mechanism and sometime causing the weights to fall off. [3][4]
History
Original Hammond
The Hammond organ is an electromechanical organ which was designed and built by Laurens Hammond in 1934. While the Hammond organ was originally sold to churches as a lower-cost alternative to the pipe organ, it came to be used for jazz, blues, and then to a greater extent in rock music (in the 1960s and 1970s) and gospel music.
The original Hammond organ imitated the function of a pipe organ's ranks of pipes in multiple registers by using additive synthesis of waveforms from harmonic series to generate its sounds. The Hammond organ's individual waveforms were made by mechanical tonewheels which rotated beneath electromagnetic pickups. The component waveforms can be mixed in varying ratios by using drawbars mounted above the two keyboards. Hammond organs also have a harmonic percussion effect, in which the 2nd and 3rd harmonic tones can be added to the attack envelope of a note.
Hammond organs have a distinctive percussive key click, which is the attack transient that occurs when all nine key contacts close, causing an audible pop or click. Originally, key click was considered to be a design defect and Hammond worked to eliminate or at least reduce it by using equalization filters. However, some performers liked the percussive effect, and it has become part of the classic sound that modern imitators of the Hammond organ have tried to reproduce. The classic way of amplifying the sound of a Hammond organ is to use a rotating speaker known as a Leslie speaker or cabinet.
First "clones"
Transporting the heavy Hammond organ, bass pedalboard (a B-3 organ, bench and pedalboard weighs 425 pounds/193kg) and Leslie speaker cabinets to performance venues makes it cumbersome for artists to tour with a vintage electromechical organ. As well, the Hammond, as with all vintage electromechanical instruments, faces the risk of technical problems with the tonewheels or electric motor, which may be difficult to resolve in a touring situation. As such, there was a strong demand amongst musicians for way of recreating the Hammond sound in a more portable, reliable fashion.
Some early emulation devices from the 1980s were criticized for their unrealistic imitation of the Hammond sound, particularly in the way the upper harmonics were voiced, and in the simulation of the rotary Leslie speaker effect. Refinements to Hammond emulations eventually led to the development of relatively lightweight electronic keyboard instruments such as the KORG BX-3 and CX-3 (1980), Roland VK-7 (1997), and Kurzweil K2600 (1999), that produced a fairly realistic re-creation of the Hammond tone.
While these instruments were widely used to replace the bulky Hammonds for band tours and club dates, jazz and blues keyboardists still tended to use a vintage Hammond for recordings, because the first clonewheel organs could not reproduce the tonal nuances of the old wooden Hammonds.
References
- ↑ Mark Vail. The Hammond Organ: Beauty in the B. - 2002. 288 pages
- 1 2 :*~*:. - MELMUSIC - .:*~*:. - Melbourne Music Center - Roland Vk7 P.M Organ
- ↑ http://joeyfehrenbach.tumblr.com/post/117090226835/jd-800-the-disgusting-red-glue-issue
- ↑ http://jd800center.blogspot.com/2013/03/one-fix-for-red-glue-problem.html
External links
 | ||