Ritchey–Chrétien telescope

George Ritchey's 24-inch (0.6 m) reflecting telescope, the first RCT to be built, later on display at the Chabot Space and Science Center in 2004

A Ritchey–Chrétien telescope (RCT or simply RC) is a specialized variant of the Cassegrain telescope that has a hyperbolic primary mirror and a hyperbolic secondary mirror designed to eliminate off-axis optical errors (coma). The RCT has a wider field of view free of optical errors compared to a more traditional reflecting telescope configuration. Since the mid 20th century, a majority of large professional research telescopes have been Ritchey–Chrétien configurations; some well-known examples are the Hubble Space Telescope, the Keck telescopes and the ESO Very Large Telescope.

History

The 40-inch (1.0 m) Ritchey at United States Naval Observatory Flagstaff Station

The Ritchey–Chrétien telescope was invented in the early 1910s by American astronomer George Willis Ritchey and French astronomer Henri Chrétien. Ritchey constructed the first successful RCT, which had a diameter aperture of 60 cm (24 in) in 1927 (e.g. Ritchey 24-inch reflector). The second RCT was a 102 cm (40 in) instrument constructed by Ritchey for the United States Naval Observatory; that telescope is still in operation at the Naval Observatory Flagstaff Station.

The Ritchey–Chrétien design is free of third-order coma and spherical aberration,^[1] although it does suffer from fifth-order coma, severe large-angle astigmatism, and comparatively severe field curvature.^[2] When focused midway between the sagittal and tangential focusing planes, stars are imaged as circles, making the RCT well suited for wide field and photographic observations. As with the other Cassegrain-configuration reflectors, the RCT has a very short optical tube assembly and compact design for a given focal length. The RCT offers good off-axis optical performance, but amateur-size examples are relatively rare due to the difficulty of mass-production of hyperbolic primary mirrors. The Ritchey–Chrétien configuration is most commonly found on high-performance professional telescopes.

A telescope with only one curved mirror, such as a Newtonian telescope, will always have aberrations. If the mirror is spherical, it will suffer from spherical aberration. If the mirror is made parabolic, to correct the spherical aberration, then it must necessarily suffer from coma and astigmatism. With two curved mirrors, such as the Ritchey–Chrétien telescope, coma can be eliminated as well. This allows a larger useful field of view. However, such designs still suffer from astigmatism. This too can be cancelled by including a third curved optical element. When this element is a mirror, the result is a three-mirror anastigmat. In practice, each of these designs may also include any number of flat fold mirrors, used to bend the optical path into more convenient configurations.

Mirror parameters

Diagram of a Ritchey-Chrétien reflector telescope

The radii of curvature of the primary and secondary mirrors, respectively, in a two-mirror Cassegrain configuration are

R_1 = -\frac{2DF}{F - B}

and

R_2 = -\frac{2DB}{F - B - D}

where

$F$ is the effective focal length of the system,
$B$ is the back focal length (the distance from the secondary to the focus), and
$D$ is the distance between the two mirrors.

If, instead of $B$ and $D$ , the known quantities are the focal length of the primary mirror, $f_{1}$ , and the distance to the focus behind the primary mirror, $b$ , then $D = f_1(F - b)/(F + f_1)$ and $B = D + b$ .

For a Ritchey–Chrétien system, the conic constants $K_{1}$ and $K_{2}$ of the two mirrors are chosen so as to eliminate third-order spherical aberration and coma; the solution is

K_1 = -1 - \frac{2}{M^3}\cdot\frac{B}{D}

and

K_2 = -1 - \frac{2}{(M - 1)^3}\left[M(2M - 1) + \frac{B}{D}\right]

where $M = F/f_1 = (F - B)/D$ is the secondary magnification.^[3] Note that $K_{1}$ and $K_{2}$ are less than $-1$ (since $M>1$ ), so both mirrors are hyperbolic. (The primary mirror is typically quite close to being parabolic, however.)

The hyperbolic curvatures are difficult to test, especially with equipment typically available to amateur telescope makers or laboratory-scale fabricators; thus, older telescope layouts predominate in these applications. However, professional optics fabricators and large research groups test their mirrors with interferometers. A Ritchey–Chrétien then requires minimal additional equipment, typically a small optical device called a null corrector that makes the hyperbolic primary look spherical for the interferometric test. On the Hubble Space Telescope, this device was built incorrectly (a reflection from an un-intended surface leading to an incorrect measurement of lens position) leading to the error in the Hubble primary mirror.^[4] Incorrect null correctors have led to other mirror fabrication errors as well, such as in the New Technology Telescope.

Examples of large Ritchey–Chrétien telescopes

Ritchey intended the 100 inch Mount Wilson Hooker telescope (1917) and the 200-inch (5 m) Hale Telescope to be RCTs. His designs would have provided sharper images over a larger usable field of view compared to the parabolic designs actually used. However, Ritchey and Hale had a falling out. With the 100 inch project already late and over budget, Hale refused to adopt the new design, with its hard-to-test curvatures, and Ritchey left the project. Both projects were then built with traditional optics. Since then, advances in optical measurement^[5] and fabrication^[6] have allowed the RCT design to take over - the Hale telescope, dedicated in 1948, turned out to be the last world-leading telescope to have a parabolic primary mirror.^[7]

16 in (41 cm) RC Optical Systems truss telescope, part of the PROMPT Telescopes array

The 10.4 m Gran Telescopio Canarias at Roque de los Muchachos Observatory
The two 10.0 m telescopes of the Keck Observatory
The four 8.2 m telescopes comprising the Very Large Telescope in Chile
The 8.2 m Subaru telescope at Mauna Kea Observatory
The two 8.0 m telescopes comprising the Gemini Observatory
The 4.1 m Visible and Infrared Survey Telescope for Astronomy at the Paranal Observatory (Chile)
The 4.0 meter Blanco telescope at the Cerro Tololo Inter-American Observatory, Chile.
The 3.9 m Anglo-Australian Telescope at Siding Spring Observatory (Australia)
The 3.58 m New Technology Telescope at the European Southern Observatory
The 3.58 m Telescopio Nazionale Galileo at Roque de los Muchachos Observatory
The 3.5 m ARC telescope at Apache Point Observatory, New Mexico, U.S.
The 3.5 m Calar Alto Observatory telescope at mount Calar Alto (Spain)
The 3.5 m Herschel Space Observatory currently operating in orbit at the L2 point 1.5 million km from Earth
The 3.50 m WIYN Observatory at Kitt Peak National Observatory
The 2.56 m effective f/11 Nordic Optical Telescope on La Palma, Canary Islands.
The 2.50 m Sloan Digital Sky Survey telescope (modified design) at Apache Point Observatory, New Mexico, U.S.
The 2.4 m Hubble Space Telescope currently in orbit around the Earth
The 2.4 m Thai National Observatory telescope on Doi Inthanon, Thailand
The 2.2 m Calar Alto Observatory telescope at mount Calar Alto (Spain)
The 2.15 m Leoncito Astronomical Complex telescope on San Juan, Argentina.
The 2.1 m telescope at San Pedro Martir, National Astronomical Observatory (Mexico)
The 2.0 m Liverpool Telescope (robotic telescope) on La Palma, Canary Islands
The 2.0 m telescope at Rozhen Observatory
The 2.0 m Himalayan Chandra Telescope of the Indian Astronomical Observatory, Hanle, India
The 1.8 m Pan-STARRS telescopes at Haleakala on Maui, Hawaii
The 1.65 m telescope at Molėtai Astronomical Observatory, Lithuania
The 1.6 m Mont-Mégantic Observatory telescope on Mont-Mégantic in Quebec, Canada
The 1.0 m Ritchey Telescope at the United States Naval Observatory Flagstaff Station (the final telescope made by G. Ritchey before his death)
The 1.0 m DFM Engineering F/8 at Embry-Riddle Observatory in Daytona Beach, Florida
The 0.85 m Spitzer Space Telescope, infrared space telescope currently operating in Earth-trailing orbit
The 0.208 m LOng Range Reconnaissance Imager (LORRI) camera on board the New Horizons space craft, currently beyond Pluto

References

↑ Sacek, Vladimir (14 July 2006). "Classical and aplanatic two-mirror systems". Notes on Amateur Telescope Optics. Retrieved 2010-04-24.
↑ Rutten, Harrie; van Venrooij, Martin (2002). Telescope Optics. Willmann-Bell. p. 67. ISBN 0-943396-18-2.
↑ Smith, Warren J. (2008). Modern Optical Engineering (4th ed.). McGraw-Hill Professional. pp. 508–510. ISBN 978-0-07-147687-4.
↑ Allen, Lew; et al. (1990). The Hubble Space Telescope Optical Systems Failure Report (PDF). NASA. NASA-TM-103443.
↑ Burge, J.H. (1993). "Advanced Techniques for Measuring Primary Mirrors for Astronomical Telescopes" (PDF). Ph.D. Thesis, University of Arizona.
↑ Wilson, R.N. (1996). Reflecting Telescope Optics I. Basic Design Theory and its Historical Development. 1. Springer-Verlag: Berlin, Heidelberg, New York. P. 454
↑ Zirker, J.B. (2005). An acre of glass: a history and forecast of the telescope. Johns Hopkins Univ Press. , p. 317.

This article is issued from Wikipedia - version of the 10/8/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Ritchey–Chrétien telescope

History

Mirror parameters

Examples of large Ritchey–Chrétien telescopes

See also

References