Rattlesnake (roller coaster)

Rattlesnake
Chessington World of Adventures
Park section Mexicana
Coordinates 51°20′55″N 0°19′04″W / 51.348662°N 0.317796°W / 51.348662; -0.317796Coordinates: 51°20′55″N 0°19′04″W / 51.348662°N 0.317796°W / 51.348662; -0.317796
Status Operating
Opening date 1998
General statistics
Type Steel – Wild Mouse
Manufacturer Maurer Söhne
Designer Werner Stengel
Model Wilde Maus Classic
Lift/launch system Chain lift hill
Height 49.25 ft (15.01 m)
Length 1,213 ft (370 m)
Speed 28 mph (45 km/h)
Inversions 0
Capacity 900 riders per hour
Height restriction 140 cm (4 ft 7 in)
Fastrack available
Rattlesnake at RCDB
Pictures of Rattlesnake at RCDB

Rattlesnake is a steel wild mouse style roller coaster ride which opened in 1998 at the Chessington World of Adventures Resort in southwest London, England.[1]

History

Entrance to the roller coaster.

Rattlesnake is a steel wild mouse style roller coaster ride which opened in 1998 at Chessington World of Adventures Resort as the theme park's third coaster. It was designed by Ing.-Büro Stengel GmbH, and manufactured by Maurer Söhne / Wilde Maus Classic. it is over 1000 feet long.[2] Rattlesnake was refurbished over the 2013 season, all the queue line animatronics were replaced, the station was repainted and the surrounding theming was replaced.

Due to local planning restrictions (a result of the park being on green belt land ) the land designated for the ride area was excavated, resulting in the ride being partially submerged below ground level. The layout consists of a steep lift hill, sharp turns and small airtime hills.

The Rattlesnake is themed around a Mexican mine of the Wild West era, with the cars resembling mine carts and a number of wooden structures and animated figures. The installation of the ride prompted the renaming of the park's 'Calamity Canyon' area to 'Mexicana', which remains today.

Ride

Rattlesnake starts with a large climb up a 45 degree angle lift hill. Once disengaging from the chain you turn right and continue to snake your way down a length of slightly sloped track making 180 degree turns every now and then. Then you travel around an elongated 270 degree right hand turn into a straight. You go up a small slope and then into some brakes. A 180 degree turn follows with a large drop down and up. Another 180 degree right hand turn follows into a number of air time hills into a building themed to look damaged at which point the on ride photo is taken. You then travel through another 180 degree turn into another air time hill before going into the final set of brakes which will halt you hard.

Restrictions

Rattlesnake has a height restriction: minimum 1.4 metres, maximum 1.96 metres. There are also chest restrictions for waist measurements 51 inches or above. However, if the lap-bar cannot fit over one's legs, then one cannot ride as they cannot be kept restrained.[3]

The ride is quite rough and jerky, and therefore anyone with back and neck problems cannot ride.

Incidents

Wikimedia Commons has media related to Rattlesnake (roller coaster).
tracks 
tracks 
Mine tunnel 

See also

References

  1. ↑ "Rattlesnake". Theme Parks UK. Retrieved 2013-10-15.
  2. ↑ "Rattlesnake – Chessington World of Adventures (Chessington, Surrey, England, UK)". RCDB. Retrieved 2013-10-15.
  3. ↑ "Rattlesnake". Chessington World of Adventures. Retrieved 2013-10-15.
This article is issued from Wikipedia - version of the 10/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.