Quench polish quench

Quench polish quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer or Melonite.[1] Three steps are involved: nitrocarburize ("quench"), polish, and post-oxidize ("quench").[2]

This process is often used when two or more of the following properties are required in a workpiece:

Common applications of the process are for piston rods of shock absorbers, cylinders and rods for hydraulic systems, pumps, axles, spindles and valves.[3]

Process

The process starts with a standard salt bath nitrocarburizing cycle, which produces a layer of ε iron nitride.[4] Next, the workpiece is mechanically polished; typical polishing processes include vibratory finishing, lapping, and centerless grinding. Finally, the workpiece is re-immersed into the salt quench bath for 20 to 30 minutes, rinsed, and oil dipped. This last step optimizes the corrosion resistance by creating a layer of iron oxide about 3 to 4 micrometers thick.[5] It also gives the workpiece a black finish.[3][6]

Corrosion resistance

Field immersion

Field immersion comparison chart
ASTM B117 Salt Spray Test

The chart on the right shows a comparison of corrision resistance against other surface treatments, based on field immersion tests. Test conditions for the immersion test are full immersion in 3% sodium chloride plus 3 g /L of hydrogen peroxide for 24 hours.

Salt spray test

The chart on the right shows a comparison of the corrosion resistance of surface treated steel automotive steering columns based on the ASTM B117 salt spray test.

References

  1. ↑ "Melonite/QPQ". HEF Group (USA). 14 June 2012. Retrieved 16 February 2014.
  2. ↑ Davis, Joseph R., ed. (2002). Surface Hardening of Steels: Understanding the Basics. ASM International. pp. 203–204. ISBN 9781615032501. Retrieved 16 February 2014.
  3. 1 2 Easterday, James R. (1996). "The Kolene QPQ(SM) Process". Detroit, Michigan: Kolene Corporation. Retrieved 14 February 2014.
  4. ↑ Liapina, T.; Leineweber, A.; Mittemeijer, E. J. (June 2003). "Nitrogen redistribution in ε/γ′-iron nitride compound layers upon annealing". Scripta Materialia. Elsevier. 48 (12): 1643–1648. doi:10.1016/s1359-6462(03)00136-2. Retrieved 16 February 2014.(subscription required)
  5. ↑ "Use Salt Bath Nitriding for Uniform & Consistent Layers". Kennebunk, Maine: Northeast Coating. Retrieved 16 February 2014.
  6. ↑ "QPQ Liquid Nitriding". Edmonton, Alberta: Thermex Metal Treating Ltd. 2010. Retrieved 16 February 2014.

External links


This article is issued from Wikipedia - version of the 6/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.