Peak halyard

Halyards (and edges) on a gaff rigged sail

In sailing, the peak halyard (or peak for short) is a line that raises the end of a gaff further from the mast,^[1]^[2] as opposed to the throat halyard which raises the end nearer to the mast. Such rigging was normal in classic gaff-rigged schooners and in other ships with fore-and-aft rigging. It is absent in Bermuda rigged boats.

The peak halyard is either bent to the gaff itself or to a wire gunter depending upon the mode of rigging.

References

↑ "peak halyard". MariSafe. Retrieved 2008-10-05.
↑ "The Gaff Rig Page". Archived from the original on December 3, 2008. Retrieved 2008-10-05.

Sails, spars and rigging

Rigs	Bermuda rig Cat rig Full rig Gaff rig Junk rig Ljungström rig Mast aft rig

Sail types	Asymmetrical spinnaker Junk sail Lug sail Parafoil Ringtail Spinnaker Turbosail Rotorsail Wingsail

Sails (sail plan)	Blooper Course Crab claw Driver Extra Fisherman Foresail Genoa Gennaker Jib Lateen Mainsail Moonraker Royal Skysail Screecher Spanker Spinnaker Spritsail Staysail Studding Topgallant Topsail Trysail Watersail

Sail anatomy and materials	Bolt rope Clew Foot Head Leech Luff Roach Tack Throat Peak Dacron Technora Kevlar Twaron

Spars	Boom Bowsprit Boomkin Dolphin striker a/k/a Martingale Pelican striker Fore-mast Gaff Jackstaff Jibboom Jigger-mast Jury rigging Main-mast Mast Mizzen-mast Truck Spinnaker pole Spreader Sprit Topmast Yard

Rigging components	Backstay Block Bobstay Boomkicker Braces Buntlines Chainplates Cleat Clevis pin Clewlines Cunningham Deadeye Downhaul Earing Fairlead Forestay Gasket Gooseneck Gunter Guy Halyard Kicker Lazy jack Outhaul Parrel beads Peak Preventer Ratlines Running rigging Shackle Spinnaker chute Standing rigging Sheet Shroud Stay mouse Stays Throat Topping lift Trapeze Traveller Turnbuckle Vang Windex

Xephos

This article is issued from Wikipedia - version of the 9/8/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.