NZR D class (1929)
NZR D class
Type and origin |
---|
Builder |
Clayton(1) |
---|
Build date |
1929 |
---|
|
Specifications |
---|
Configuration |
0-4-0 |
---|
Driver dia. |
42 |
---|
Loco weight |
25.7 long tons (26.1 t; 28.8 short tons) |
---|
Firebox: • Firegrate area |
12.5 sq ft (1.16 m2) |
---|
Boiler pressure |
300 lbf/in2 (2.07 MPa) |
---|
Heating surface |
320 sq ft (30 m2) |
---|
Cylinders |
4, vertical |
---|
Cylinder size |
7 in × 10 in (178 mm × 254 mm) |
---|
|
Career |
---|
Operators |
NZR |
---|
Disposition |
Scrapped |
---|
|
The NZR D class of 1929 comprised one 0-4-0 tank locomotive that was built for the New Zealand Railways Department by the Clayton Wagons Ltd in Lincoln, England.
History
Originally, D 1 was purchased for railcar type service but it was not successful. It had a White-Forster type boiler designed for a working pressure of 300 psi (2,068 kPa), had four vertical cylinders housed in the rear of the cab and was high geared. At a normal engine speed of 400 rpm, the unit was calculated to develop 200 horsepower (150 kW). The engine drove a central transverse jackshaft through reduction gearing, the drive from the jackshaft being transmitted to the wheels through conventional side rods.
Working Life
On arrival in New Zealand, D 1 was found to be more than 25 percent heavier than the specified maximum of 20 long tons (20.3 t; 22.4 short tons) and after trials in Wellington was allocated for use as a shunting engine at the Otahuhu workshops. However it never proved satisfactory and was written off in 1936 and scrapped and D 1 did not survive to be preserved.
Rail vehicles of New Zealand |
---|
|
Diesel locomotives | |
---|
|
Diesel Multiple Units | |
---|
|
Electric locomotives | |
---|
|
Electric Multiple Units | |
---|
|
Railcars | |
---|
|
Steam locomotives | |
---|
|
Locomotive hauled carriages | |
---|
|
|