Montney Formation

Montney Formation
Stratigraphic range: Anisian
Type Geological formation
Underlies Doig Formation, Fernie Group
Overlies Belloy Formation
Area 127,000 acres (510 km2)[1]
Thickness up to 280 metres (920 ft)[2]
Lithology
Primary Siltstone and shale
Other Dolomitic siltstone, sandstone
Location
Coordinates 56°34′18″N 121°13′19″W / 56.57159°N 121.2219°W / 56.57159; -121.2219 (Buick Creek No. 7 well)Coordinates: 56°34′18″N 121°13′19″W / 56.57159°N 121.2219°W / 56.57159; -121.2219 (Buick Creek No. 7 well)
Region British Columbia, Alberta
Country  Canada
Type section
Named for Montney, British Columbia
Named by J.H. Armitage, 1962

The Montney Formation is a stratigraphical unit of Lower Triassic age in the Western Canadian Sedimentary Basin in British Columbia and Alberta.

It takes the name from the hamlet of Montney and was first described in Texaco's Buick Creek No. 7 well by J.H. Armitage in 1962.[3] The well was drilled 41 kilometers (25 mi) north of Fort St. John, immediately east of the Alaska Highway.

Lithology

The formation is composed of siltstone and dark grey shale, with dolomitic siltstone in the base and fine grained sandstone towards the top.[2] The facies is shaley in the north and west of the extent (Fort St. John), silty in the center (Dawson Creek and Pouce Coupe areas) and becomes coarser (sandy) in western Alberta (Valleyview area).[4]

Oil and gas production

The Montney Formation is a major shale gas and shale oil resource. A comprehensive joint study on the potential of the Montney Formation was completed by the National Energy Board, British Columbia Oil and Gas Commission and the Alberta Energy Regulator in 2013. This study found that the potential resources contained within the formation were 449 trillion cubic feet of marketable natural gas, 14,521 million barrels of marketable natural gas liquids (NGLs) and 1,125 million barrels of oil. This estimate makes it one of the largest known gas resources in the world and equivalent to 145 years of Canada's 2012 consumption. [5][6]

Gas is produced from the Montney Formation in both British Columbia and Alberta. Major operators include Progress Energy Canada Ltd. (a subsidiary of Malaysia’s (PETRONAS), Royal Dutch Shell plc, Encana Corporation, Murphy Oil Corporation, ARC Resources Ltd., and Advantage Oil & Gas Ltd. [7][1] and oil is produced from the formation in Northern Alberta.[4] Horizontal drilling and extensive fracturing process is necessary to have the fluid flow through the low permeability siltstone. Shale gas extraction emerged in the late 2000s in the distal facies of the formation's western extent.

Hydraulic fracturing in Canada

Massive hydraulic fracturing has been widely used in Alberta since the late 1970s.[8]:1044 The method is currently used in development of the Cardium, Duvernay, Montney and Viking formations in Alberta, Bakken formation in Saskatchewan, Montney and Horn River formations in British Columbia.

Distribution

The Montney Formation reaches maximum thickness in the foothills of the northern Canadian Rockies at 280 meters (920 ft), and thins out towards the north up to the Fort Nelson area and towards the east to Peace River.

Relationship to other units

Montney Formation is unconformably overlain by Jurassic or Cretaceous beds such as the Doig Formation or Fernie Group and unconformably underlain by the Permian or Carboniferous strata such as the Belloy Formation.

References

This article is issued from Wikipedia - version of the 11/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.