Magnetic field oscillating amplified thruster

The magnetic field oscillating amplified thruster (MOA; often named as plasma engine by the media) is a versatile electrothermodynamic system, which is able to accelerate nearly every medium to extremely high velocities, thereby generating a high energetic plasma jet in the exhaust.

To do so, MOA utilises a so-called Alfvén wave, a physical principle within magnetohydrodynamics that was described first in 1942 by the later Nobel Prize winner Hannes Alfvén and which states that fluctuating magnetic fields can induce density waves in electric conductive media (e.g., plasma, salty water, etc.). These density waves can reach very high velocities and as the particles inside the medium are coupled to them, the particles are as well accelerated to very high velocities, accordingly reaching very high kinetic energies.

Application areas

Because of the high exhaust velocities and the associated high specific impulse and/or the high particle energy, two prime application areas emerge: spaceflight and coating of particular materials. For the spaceflight case, the high specific impulse leads to 90% reduction in propellant consumption when comparing MOA to current state-of-the-art ion engines. For the coating case, the high kinetic energy of the exhaust particles leads to a high penetration depth within the target material. This allows for example to harden steel, aluminium and other metals, but also to change the material properties of glass and plastics.

An additional advantage of the MOA concept is its corrosion free behaviour, leading to a long lifetime of the system. The same magnetic fields that generate the Alfvén waves, prohibit high energy particles from hitting the thruster's wall or any other of MOA's structural components, therefore avoiding any particle induced damage almost inherently.

Set-up of the MOA System

Firing of the MOA Thruster inside of a vacuum chamber

In principle the MOA thruster is composed of five subsystems:

The plasma generator produces a continuous flow of ionized particles, which drift inside the central tube towards the exhaust nozzle. These particles could for example be nitrogen- or hydrogen molecules, as well as noble gases like argon or xenon. Since the particles are ionized, they react on the two magnetic fields, which are generated by the primary and the secondary coil. Of these two, the primary coil is permanently switched on as it also forms the magnetic exhaust nozzle, while the secondary coil is cyclically switched on and off to deform the magnetic field lines of the system. By this deformation Alfén Waves are generated, which – in the next step – transport, compress and accelerate the propulsive medium to specific pre-defined parameters. Finally the supply and control units make sure that the MOA thruster operates within the anticipated parameters.

As the concept requires a plasma generator to produce the ionized particles, MOA can in principle be described as an electric propulsion system, similar to an ion engine. However, because of the interaction of the magnetic fields, the particles are as well compressed and adiabatically heated up, thereby turning the whole system into a electrothermodynamic system. The combination of electric and thermodynamic principles leads also to a unification of the respective advantages. As such MOA features on one hand the high efficiency of the electric propulsion systems and on the other hand the ability to accelerate a high number of particles – just like a thermal system – therefore achieving a relatively high thrust at a high specific impulse. The combination of high particle energy/exhaust velocity and relatively high thrust in this form is a novel proposal. The high flexibility of changing thrust and specific impulse in-flight by adapting massflow and power consumption is at the moment a unique feature provided by this novel thruster concept.

Current status

After a propulsion concept based on Alfvén waves was first proposed in the middle of the 1980s, the MOA concept was first tested at Graz Technical University in the vacuum chamber of the Institute of Communication Networks and Satellite Communication. The test campaign lasted several weeks and showed the feasibility of the MOA concept. The obtained results were presented at the International Astronautical Congress in Fukuoka, Japan, on October 21, 2005. In a next step, a dedicated company called Qasar Technologies GmbH had been set up to further develop the MOA technology and to test potential terrestrial applications, both for spaceflight, in the area of coating and other areas. In summer 2005, the MOA prototype has reached TRL 5 (technology readiness level) after the component and/or breadboard has been validated in a relevant environment – the vacuum chamber at the Graz Technical University.

The scientists foresee several potential customers for the MOA technology, such as aerospace companies like EADS, Hughes Network Systems or Alcatel Alenia Space, aircraft manufacturers like Boeing, as well as companies specializing in materials and within automotive sector.

External links

This article is issued from Wikipedia - version of the 10/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.