Lubuge Dam

Lubuge Dam
Location of Lubuge Dam in China
Country China
Location Lubugexiang, Luoping County, Qujing, Yunnan/Guizhou
Coordinates 24°51′58.72″N 104°34′47.47″E / 24.8663111°N 104.5798528°E / 24.8663111; 104.5798528Coordinates: 24°51′58.72″N 104°34′47.47″E / 24.8663111°N 104.5798528°E / 24.8663111; 104.5798528
Purpose Power
Status Operational
Construction began 1982
Opening date 1988 (1988)
Dam and spillways
Type of dam Embankment, rock-fill
Impounds Huangni River
Height 101 m (331 ft)
Length 217.2 m (713 ft)
Width (crest) 10 m (33 ft)
Spillway capacity Main: 6,424 m3/s (226,900 cu ft/s)
Left bank tunnel: 1,995 m3/s (70,500 cu ft/s)
Right bank tunnel: 1,658 m3/s (58,600 cu ft/s)
Reservoir
Total capacity 110,000,000 m3 (89,000 acre·ft)
Catchment area 7,300 km2 (2,800 sq mi)
Normal elevation 1,130 m (3,710 ft)
Power station
Name Lubuge Hydropower Station
Coordinates 24°47′20.20″N 104°32′20.23″E / 24.7889444°N 104.5389528°E / 24.7889444; 104.5389528 (Lubuge Hydropower Station)
Commission date 1988-1991
Hydraulic head 327.7 m (1,075 ft)
Turbines 4 x 150 MW Francis-type
Installed capacity 600 MW

The Lubuge Dam (Chinese: 鲁布革水电站) is a rock-fill embankment dam on the Huangni River, a tributary of the Nanpan River, located near Lubugexiang in Luoping County on the border of Guizhou and Yunnan Provinces, China. The primary purpose of the dam is hydroelectric power generation and it supports a 600 MW power station. Construction on the project began in 1982 and it was completed in 1991. Funded by the World Bank, it was the first loan offered by the bank to China's power sector.[1]

Background

In June 1981, the Government of the People's Republic of China approved the project. Construction on the dam began in 1982 and the river was diverted on 15 November 1985. On 21 November 1988, the dam began to impound the reservoir and the first generator was commissioned on 27 December 1988. The second was commissioned in 1989 and the third in 1990. The fourth and final generator went online on 14 June 1991. The entire project was complete on 31 December 1991. A US$141.4 million World Bank loan helped fund the dam and power station. It was the first World Bank loan for the power sector in China.[1]

Design

The 101 m (331 ft) rock-fill dam creates a reservoir with a storage capacity of 110,000,000 m3 (89,000 acre·ft). To control floods, the dam has three spillways. The main is an intake hold behind the dam with a discharge capacity of 6,424 m3/s (226,900 cu ft/s). The second is a tunnel on the left bank of the dam with a capacity of 1,995 m3/s (70,500 cu ft/s). Finally, the third spillway is tunnel on the right back with a capacity of 1,658 m3/s (58,600 cu ft/s). To produce power water is sent to an underground power station downstream through a 9.4 km (5.8 mi) long headrace tunnel. The power station contains four 150 MW Francis turbine-generators for a total installed capacity of 600 MW. [2]

See also

References

  1. 1 2 "Project Completion Report – China - Lubuge Hydroelectric Project" (PDF). World Bank. 22 November 1993. Retrieved 8 June 2014. "This was the first Bank loan to the power sector in China." - PDF Page 3 (Memorandum)
  2. "Lubuge power plant technical characteristics of hydropower units" (PDF) (in Chinese). Dongfang. June 1992. Retrieved 8 June 2014.
This article is issued from Wikipedia - version of the 7/24/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.