Franklin bells

Franklin bells
An illustration of a set of Franklin bells, printed in George Adams' Lectures on Natural and Experimental Philosophy.

Franklin bells (also known as Gordon’s Bells or lightning bells) are an early demonstration of electric charge designed to work with a Leyden jar. Franklin bells are only a qualitative indicator of electric charge and were used for simple demonstrations rather than research. This was the first device that converted electrical energy into mechanical energy in the form of continuous mechanical motion, in this case, the moving of a bell clapper back and forth between two oppositely charged bells.

History

Usually, the creation of this device is attributed to Benjamin Franklin , who was supposed to have invented it in the 18th century during his experimentation with electricity. But the original discoverer was Andrew Gordon, Professor of Natural Philosophy at the University at Erfurt, Germany . About 1742 he invented a device known as the "electric chimes", which was widely described in textbooks of electricity. Franklin made use of Gordon's idea by connecting one bell to his pointed lightning rod, attached to a chimney, and a second bell to the ground. One of his papers contains the following description:

In September 1752, I erected an Iron Rod to draw the Lightning down into my House, in order to make some Experiments on it, with two Bells to give Notice when the Rod should be electrified.

Design and operation

The bells consist of a metal stand with a crossbar, from which hang three bells. The outer two bells hang from conductive metal chains, while the central bell hangs from a nonconductive thread. In the spaces between these bells hang two metal clappers, small pendulums, on nonconductive threads. A short metal chain hangs from the central bell.

The central bell's chain is put in contact with the inner surface of a Leyden jar, while the outside surface of the jar is put in contact with the metal stand. Thus, the central bell takes its charge from the inner surface of the jar, while the outer surface charges the two bells on the conductive chains. This causes the bells to have a difference in electrical potential equal to that between the inner and outer surfaces of the jar. The hanging metal clappers will be attracted to one bell, will touch it, pick up its charge, and be repelled; they will then swing across to the other bell, and do the same there. Each time the clappers touch a bell, charge is transferred between the inner and outer surfaces of the Leyden jar. When the jar is completely discharged, the bells will stop ringing.

See also

External links

This article is issued from Wikipedia - version of the 12/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.