LSWR T6 class
LSWR T6 class|
|
| Specifications |
|---|
| Configuration |
4-4-0 |
|---|
| UIC class |
2'Bn |
|---|
| Gauge |
4 ft 8 1⁄2 in (1,435 mm) |
|---|
| Leading dia. |
3 ft 9 3⁄4 in (1.162 m) |
|---|
| Driver dia. |
7 ft 1 in (2.159 m) |
|---|
| Length |
54 ft 5 3⁄8 in (16.60 m) |
|---|
| Height |
13 ft 2 3⁄4 in (4.03 m) |
|---|
| Axle load |
16.20 long tons (16.46 t) |
|---|
| Adhesive weight |
31.70 long tons (32.21 t) |
|---|
| Loco weight |
50.125 long tons (50.929 t) |
|---|
| Tender weight |
36.20 long tons (36.78 t) |
|---|
| Fuel type |
Coal |
|---|
| Fuel capacity |
3.00 long tons (3.05 t) |
|---|
| Water cap |
3,300 imperial gallons (15,000 l; 4,000 US gal) |
|---|
| Boiler pressure |
175 psi (1.21 MPa) |
|---|
| Cylinders |
Two, outside |
|---|
| Cylinder size |
19 in × 26 in (483 mm × 660 mm) |
|---|
|
|
|
|
|
The LSWR T6 class was a class of express passenger 4-4-0 steam locomotives designed for the London and South Western Railway by William Adams. Ten were constructed at Nine Elms Locomotive Works between 1885–1886.
The class were numbered 677–686, and were a development of the X2 class, based on experience gained with the locomotives in traffic. The boiler was based on that used in the T3 class, and shared the main dimensions.
Table of locomotive orders
| Year | Order | Quantity | LSWR Numbers | Notes |
|---|
| 1895 | T6 | 10 | 677–686 | |
|
All passed to the Southern Railway at the grouping in 1923. Withdrawals started in 1933, and by the end of 1937 only two remained. No. 684 went in 1940, and the last, 681 was retired in April 1943. All were scrapped.
References
- Russell, J. H. (1991). A Pictorial Record of Southern Locomotives. OPC-Haynes. pp. 185–186.