Knee wall

Diagram showing knee-wall used in timber roof construction

A knee wall is a short wall, typically under three feet (one metre) in height, used to support the rafters in timber roof construction. In his book A Visual Dictionary of Architecture, Francis D. K. Ching defines a knee wall as "a short wall supporting rafters at some intermediate position along their length."[1] The knee wall takes the place of a purlin, providing support to rafters which therefore need not be large enough to span from the ridge to the eaves. Typically the knee wall is finished with plaster, enclosing the useful part of the attic space (not necessarily high enough for a person to stand up), while the remaining small space under the eaves is only useful for storage.

The term is derived from the association with the vertical location of the human knee. Knee walls are common in old houses in which the ceiling on the top floor is an attic, i.e. the ceiling is the underside of the roof and slopes down on one or more sides. A house of this kind may be referred to as 'Cape Cod' etc.

See also

References

  1. ↑ Ching, Francis D. K. (1995). A Visual Dictionary of Architecture. New York: Van Nostrand Reinhold. p. 211. ISBN 0-442-00904-6.
This article is issued from Wikipedia - version of the 10/2/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.