Isokaze-class destroyer

Amatsukaze on patrol, Yangzi River, 1927
Class overview
Name: Isokaze class
Builders:
Operators:  Imperial Japanese Navy
Preceded by: Kaba class
Succeeded by: Momo class
In commission: 1 April 1916 – 1 April 1936
Completed: 4
Retired: 4
General characteristics
Type: Destroyer
Displacement:
  • 1,227 long tons (1,247 t) normal,
  • 1,550 long tons (1,570 t) full load
Length:
  • 94.5 m (310 ft) pp,
  • 96.9 m (318 ft) overall
Beam: 8.5 m (28 ft)
Draught: 2.8 m (9.2 ft)
Propulsion: 3-shaft steam turbine, 5 heavy oil-fired boilers 27,000 ihp (20,000 kW)
Speed: 34 knots (63 km/h)
Range: 3,360 nautical miles (6,220 km) at 14 knots (26 km/h)
Complement: 128
Armament:

The Isokaze-class destroyers (磯風型駆逐艦 Isokazegata kuchikukan) was a class of four destroyers of the Imperial Japanese Navy.[1]

Background

The Isokaze-class destroyers were designed as part of the first phase of the Hachi-hachi Kantai program of the Imperial Japanese Navy. With the commissioning of the new high speed battleships Yamashiro and Ise, escort vessels with equally high speed and blue ocean capabilities were required.

Four vessels were built, with the order split between Kure Naval Arsenal, Kawasaki Shipyards in Kobe and Mitsubishi Shipyards in Nagasaki.[2]

Design

The Isokaze-class ships were a slightly larger and updated version of the previous Umikaze class. Externally, the design went to a three smokestack profile, with a curved, rather than straight bow.

Internally, the engines were replaced with heavy fuel oil-fired steam turbine engines. Two vessels (Amatsukaze and Tokitsukaze) used Brown-Curtis turbine engines, and the other two (Isokaze, Hamakaze) used Parsons turbine engines. Advances in turbine design and construction permitted more reliable operation than previously with the Umikaze. The rated power of 27,000 shp (20,000 kW) gave the vessels a high speed of 34 knots (63 km/h), and a range of 3,360 nautical miles (6,220 km) at 14 knots (26 km/h); however, the engines could not be run continuously at over 7,000 shp (5,200 kW), which still considerably limited performance.

Armament was increased over the previous classes, with four QF 4.7 inch Gun Mk I - IV, pedestal-mounted along the centerline of the vessel, two in front of the smokestacks and two to the stern. The number of torpedoes was increased to three launchers, each with a pair of 533 mm torpedoes. Anti-aircraft protection was provided by four machine guns.

Operational history

The Isokaze-class destroyers were completed in time to serve in the very final stages of World War I.[3] Tokitsukaze broke in two and sank off of Miyazaki Prefecture, Kyūshū in 1918. The wreck was raised and repaired at the Maizuru Naval Arsenal, and although re-commissioned as a first class destroyer, was used thereafter as a training vessel at the Imperial Japanese Navy Academy at Etajima.[4]

All Isokaze-class ships were retired on 1 April 1936.[5]

List of ships

Kanji Name Builder Laid down Launched Completed Fate
磯風 Isokaze Kure Naval Arsenal, Japan 1916-04-05 1916-10-05 1917-02-28 Retired 1936-04-01
天津風 Amatsukaze Kure Naval Arsenal, Japan 1916-04-01 1916-10-05 1917-04-14 Retired 1936-04-01
浜風 Hamakaze Mitsubishi Heavy Industries, Nagasaki, Japan 1916-04-01 1916-10-30 1917-03-28 Retired 1936-04-01
時津風 Tokitsukaze Kawasaki Shipbuilding Corporation, Kobe, Japan 1916-03-10 1916-12-27 1917-05-31 Wrecked Miyazaki coast 1918-03-30, raised and re-commissioned 1920-02-17; retired 1936-04-01

References

Notes

  1. Jentsura, Warships of the Imperial Japanese Navy, 1869-1945
  2. Howarth, The Fighting Ships of the Rising Sun
  3. "Japanese Navy, IJN, World War 1". Naval-history.net. Retrieved 2013-02-03.
  4. Globalsecurity.org, IJN Isokaze class destroyers
  5. Nishida, Imperial Japanese Navy

Books

Wikimedia Commons has media related to Isokaze class destroyer.


This article is issued from Wikipedia - version of the 3/8/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.