Indian locomotive class WDM-3A
Indian WDM - 3A
|
Type and origin |
---|
Power type |
Diesel |
---|
Builder |
Alco, DLW |
---|
Model |
ALCO-251C |
---|
Build date |
August 22, 1994 onwards |
---|
Total produced |
WDM-3A : 1296 as of December 2015 WDM-3D : 510 as of December 2015 WDG-3A : 1145 as of December 2015 |
---|
|
Specifications |
---|
UIC class |
Co-Co |
---|
Gauge |
1,676 mm (5 ft 6 in) |
---|
Bogies |
ALCO Asymmetric cast frame trimount |
---|
Wheel diameter |
1,092 mm (3 ft 7 in) |
---|
Wheelbase |
12.834 m (42 ft 1 1⁄4 in) |
---|
Length |
17.12 m (56 ft 2 in) |
---|
Width |
2.864 m (9 ft 4 3⁄4 in) |
---|
Height |
4.185 m (13 ft 8 3⁄4 in) |
---|
Axle load |
18,800 kg (41,400 lb) |
---|
Loco weight |
123,000 kg (271,000 lb) |
---|
Fuel type |
Diesel |
---|
Fuel capacity |
5,000 L (1,100 imp gal; 1,300 US gal) |
---|
Prime mover |
ALCO 251-C |
---|
RPM range |
400 - 1050 rpm |
---|
Engine type |
V16 Diesel engine |
---|
Aspiration |
ABB VTC304-15 or Napier NA 295 IR turbocharger |
---|
Traction motors |
BHEL TA 10102 CW (new), BHEL TG 10931 AZ(old) |
---|
Cylinders |
16 |
---|
Cylinder size |
228 mm × 266 mm (8.98 in × 10.47 in) bore x stroke |
---|
Transmission |
Diesel electric |
---|
MU working |
2 |
---|
Train brakes |
Air, Vacuum and Dual |
---|
|
Performance figures |
---|
Maximum speed |
120 km/h (75 mph) |
---|
Power output |
Max:3,300 hp (2,500 kW) Site rated:2,900 hp (2,200 kW) |
---|
Tractive effort |
30.45 t (30 long tons; 34 short tons) |
---|
Factor of adh. |
0.27 |
---|
|
Career |
---|
Operators |
Indian Railways |
---|
Numbers |
14001-14079, 14080-14143 |
---|
Nicknames |
Cheetah, Prabal, Velociti, Awadh, Firex, Sher Punjab, Veer |
---|
Locale |
All over Indian Railways |
---|
Preserved |
1 |
---|
Disposition |
active |
---|
|
The class WDM-3A is Indian Railways' workhorse diesel locomotive. Since 1994, it has been manufactured in India by the Diesel Locomotive Works (DLW), Varanasi. The model name stands for broad gauge (W), diesel (D), mixed traffic (M) engine. The WDM-3A is the most common diesel locomotive of Indian Railways. The WDM-3A is a variant of the original WDM-2C. These units have been retro-fitted with dual brakes, in addition to the air and vacuum brakes. The WDM-3A locos have a maximum speed of 120 km/h (75 mph). The gear ratio is 65:18.[1]
The loco is now widely used across India for long distance passenger trains due to its ruggedness and high tractive loads and acceleration.
History
The first one was delivered on August 22, 1994, It was then WDM-2C. Over 150+ locos were produced till 1998.
Some of the sheds that hold WDM 3A
- Andal(UDL)
- Abu Road(ABR)
- Bardhaman(BWN)
- Bokaro Steel City(BKSC)
- Bondamunda(BNDM)
- Ernakulam(ERS)
- Erode(ED)
- Gonda(GD)
- Gooty(GY)
- Guntakal(GTL)
- Guwahati(NGC)
- Howrah(HWH)
- Itarsi(ET)
- Jamalpur(JMP)
- Jhansi(JHS)
- Kalyan(KYN)
- Katni(KTE)
- Kazipet(KZY)
- Kharagpur(KGP)
- Krishnarajapuram(KJM)
- Lucknow(LKO)
- Ludhiana(LDH)
- Malda Town(MLDT)
- Moula Ali(MLY)
- Mughalsarai(MGS)
- Golden Rock(GOC)
- Pune(PUNE)
- Patratu(PTRU)
- Raipur(RAIPUR)
- Ratlam(RTM)
- Samastipur(SMP)
- Tughlakabad(TKD)
- Vatva(VTA)
- Tondiarpet(TNP)
- Visakhapatnam(VSKP)
[2]
Technical specifications[3]
Manufacturers |
Alco, DLW |
Engine |
Alco 251-C, 16 cylinder, 3,300 hp (2,500 kW) (2,430 hp or 1,810 kW site rating) with Alco 710/720/?? turbo supercharged engine. 1,050 rpm max, 400 rpm idle; 228 mm × 266 mm (8.98 in × 10.47 in) bore x stroke; compression ratio 12.5:1. Direct fuel injection, centrifugal pump cooling system (2,457 L/min (540 imp gal/min; 649 US gal/min) at 1,000 rpm), fan driven by eddy current clutch (86 hp or 64 kW at 1,000 rpm) |
Governor |
GE 17MG8 / Woodwards 8574-650 |
Transmission |
Electric, with BHEL TA 10102 CW alternator (1,050 rpm, 1130 V, 4,400 amperes) (Earlier used BHEL TG 10931 AZ alternator) |
Traction motors |
GE752 (original Alco models) (405 hp or 302 kW), BHEL 4906 BZ (AZ?) (435 hp or 324 kW) and (newer) 4907 AZ (with roller bearings) |
Axle load |
18.8 tonnes (18.5 long tons; 20.7 short tons), total weight 112.8 t (111.0 long tons; 124.3 short tons) |
Bogies |
Alco design cast frame trimount (Co-Co) bogies |
Starting TE |
30.45 t (29.97 long tons; 33.57 short tons), at adhesion 27% |
Length over buffer beams |
15,862 mm (52 ft 1⁄2 in) |
Distance between bogies |
10,516 mm (34 ft 6 in) |
See also
References
|
---|
|
Steam | BESA designs | |
---|
| IRS designs | |
---|
| World War II designs | |
---|
| IGR standard designs | |
---|
| |
---|
|
Diesel | | |
---|
| Passenger | |
---|
| Goods |
- WDG 2/3A
- WDG 3B, WDG 3C, WDG 3D
- WDG 4
- WDG 5
|
---|
| Shunting |
- WDS 1
- WDS 2
- WDS 3/4C
- WDS 4, WDS 4A, WDS 4B, WDS 4D
- WDS 4C
- WDS 5
- WDS 6
- WDS 8
|
---|
|
---|
|
DC electric | Mixed type |
- WCM 1
- WCM 2
- WCM 3
- WCM 4
- WCM 5
- WCM 6
|
---|
| Passenger |
- WCP 1, WCP 2
- WCP 3, WCP 4
|
---|
| Goods | |
---|
|
---|
|
AC electric | Mixed type | |
---|
| Passenger | |
---|
| |
- WAG 1
- WAG 2
- WAG 3
- WAG 4
- WAG 5
- WAG 5A, WAG 5B
- WAG 6A
- WAG 6B, WAG 6c
- WAG 7
- WAG 9
|
---|
|
---|
|
Dual (AC and DC) electric | |
---|