Garrett TFE731

TFE731
TFE731-4R of a Cessna Citation VII
Type Geared turbofan
National origin United States
Manufacturer Garrett AiResearch
Honeywell Aerospace
First run 1970
Major applications CASA C-101
Cessna Citation III
Dassault Falcon 900
Hawker 800
Learjet 31
AIDC AT-3
Textron AirLand Scorpion
Number built 11,000+
Developed into Honeywell/ITEC F124/F125

The Garrett TFE731 (now Honeywell TFE731) is a family of geared turbofan engines commonly used on business jet aircraft. Garrett AiResearch originally designed and built the engine, which due to mergers was later produced by AlliedSignal and now Honeywell Aerospace.

Since the engine was introduced in 1972, over 11,000 engines have been built, flying over 100 million flight-hours.[1]

Development

Honeywell TFE731 and S-duct intake of a Dassault Falcon 900EX exposed during maintenance
View of a TFE731-4R in maintenance with cowlings, afterbody and thrust reverser removed.

The TFE731 was based on the core of the TSCP700, which was specifically developed for use as the auxiliary power unit (APU) on the McDonnell Douglas DC-10. The design featured two important factors: low fuel consumption, and low noise profiles that met the newly established U.S. noise abatement regulations.

The first test run of the TFE731 occurred in 1970 at Garrett's plant in Torrance, California.[2] The first production model, the TFE731-2, began rolling off the assembly line in August, 1972, and was used on the Learjet 35/36 and Dassault Falcon 10, both of which entered production in 1973.

The TFE731-3 was developed for use in the Lockheed JetStar re-engining program, and subsequent versions of it have been used on a number of aircraft, including the Learjet 55.

In 1975, the TFE731 was named Aviation Product of the Year by Ziff-Davis Publishing Company.[3]

The -5 model was certified in 1982, and a decade later, an engine utilizing the TFE731-5 power section and a TFE731-3 fan was built and designated the TFE731-4, intended to power the Cessna Citation VII aircraft.[4]

The most recent version is the TFE731-50, based on the -60 used on the Falcon 900DX, which underwent its flight test program in 2005. Honeywell has developed this engine complete with nacelle as a candidate to retrofit a number of aircraft equipped with older engines.[5]

Design

The TFE731-60 has an inlet diameter of 0.787 m. The fan consists of 22 fan blades, 52 exit-guide vanes, and ten struts, and is driven by a gearbox. The five-stage compressor has four axial (LP) stages and one radial or centrifugal (HP) stage.

Variants

TFE731-2
TFE731-3
TFE731-4
TFE731-5
TFE731-20
TFE731-40
TFE731-50
TFE731-60
TFE731-1100

Applications

Specifications (TFE731-2)

Data from [6]

General characteristics

Components

Performance

See also

Related development
Comparable engines
Related lists

Notes

  1. ↑ "TFE731". Honeywell.
  2. ↑ Schoneberger, William A.; Scholl, Robert R. H. (1985). Out of Thin Air: Garrett's First 50 Years. Phoenix: Garrett Corporation. p. 205. ISBN 0-9617029-0-7.
  3. ↑ Schoneberger, p. 204.
  4. ↑ "An Historical Look at the TFE731 Engine" (PDF). Duncan Debrief. Summer 2001. p. 11.
  5. ↑ "Honeywell TFE731-50 Turbofan Engine Completes First Flight" (Press release). Honeywell. 2005-05-18. Retrieved 2006-12-05.
  6. ↑ "Gas Turbine Engines" (PDF). Aviation Week & Space Technology Source Book. 2009. p. 119.
  7. ↑ David Esler (Oct 27, 2016). "Honeywell's Super-Midsize HTF7000 Engine". Business & Commercial Aviation. Aviation Week.

References

Wikimedia Commons has media related to Honeywell TFE731.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.