Holland 602 type submarine

USS H-3 served as the prototype for the class
Class overview
Builders: Vickers Canada
Operators:
In service: 1915
In commission: - 1950
General characteristics
Displacement:
  • 390 tons surfaced
  • 520 tons submerged
Length: 46 m (151 ft)
Beam: 4.9 m (16 ft)
Draught: 3.8 m (12 ft)
Speed:
  • surface - 14.5 knots (26.9 km/h)
  • submerged - 10.5 knots (19.4 km/h)
Complement: 32
Sensors and
processing systems:		 Fessenden transducer
Armament:
  • 4 × bow torpedo tubes
  • (8 torpedoes)
  • 1 × 45 mm semi-automatic gun (200 rounds) or
  • 1 × 47 mm gun
  • 1 × machine gun
The torpedo room of USS H-5 (SS-148) in 1919. The breeches of the four 18-inch (457-mm) torpedo tubes are at center.

The Holland 602 type submarine, also known as the H class submarine was one of the most numerous submarines of the First World War. The type was designed by the Electric Boat Co. of the United States but most of the boats were built abroad: in Canada by the subsidiary of the British Vickers company and in British shipyards.

Operators included the United States Navy, the Chilean Navy, the Royal Navy (33 submarines), the Imperial Russian Navy, the Soviet Navy, the Italian Regia Marina, the Royal Canadian Navy, the Royal Dutch Navy and the navy of the short-lived Ukrainian State.

Background and history

The predecessor for this class were two submarines ordered in 1911 for the Chilean Navy, to the John Philip Holland design 19-E and design 19-B. These eventually became the CC class submarines of the Royal Canadian Navy.

Three prototypes were then built to an improved design 30, with an increased displacement of 358/434 tons. These became the United States H class submarines and were designated H-1, H-2 and H-3.

In October 1914, after the start of World War I, the British Admiralty ordered ten submarines to design 602E, to be built by Canadian Vickers in Montreal, Quebec. These would become the British H class submarines. Another ten submarines were secretly constructed at Fore River Yard at Quincy, Massachusetts, in the then neutral United States. This group was impounded by the United States government and ended up in the Chilean Navy and the Royal Canadian Navy after the American declaration of war. A third group, of twenty-five British H class subs, was constructed in 1917-1919 in Britain, many of them serving in World War II.

In the summer of 1915 eight type 602 submarines were ordered by the Italian Regia Marina. These were built in Montreal, Quebec.

In 1917 the Imperial Russian Navy ordered a total of 17 submarines for its Baltic and Black Sea Fleets. These were built at a temporary shipyard in Barnet on Burrard Inlet outside Vancouver, British Columbia. They were then disassembled, taken by ship to Vladivostok, by the Trans-Siberian Railroad to Saint Petersburg and Nikolayev to be reassembled in Russian Shipyards. In Russia they were known as the "Amerikansky Golland" class submarines.

Six of the boats were undelivered at the time of the Russian Revolution of 1917. These were later bought by the United States Navy, and after reassembly at the Puget Sound Navy Yard, they became the United States H class submarines H-4 - H-9. In 1918 the Black Sea Fleet submarines "АG-21" - "АG-26" were taken over by the Ukrainian State Navy. In May 1918 the Finnish Navy salvaged two of the Baltic fleet submarines scuttled off Hanko at the end of the Finnish Civil War, but was unable to refit them for service.

Submarines

Royal Navy

United States Navy

Italian Regia Marina

Imperial Russian Navy

Royal Canadian Navy

Chilean Navy

See also

Media related to Holland 602 type submarine at Wikimedia Commons

Notes

    References

    This article is issued from Wikipedia - version of the 5/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.