Hiking boot

Main articles: Hiking equipment and Hiking
Two dark gray ankle-covering boots covered in suede and cloth with laces going through hooks rather than eyelets, on a pebbly surface
Typical early 21st-century hiking boots

Hiking (walking) boots are footwear specifically designed for protecting the feet and ankles during outdoor walking activities such as hiking. They are one of the most important items of hiking gear, since their quality and durability can determine a hiker's ability to walk long distances without injury. Hiking boots are constructed to provide comfort for walking considerable distance over rough terrain. Boots that protect the hiker's feet and heel are recommended. Hiking boots give ankle support and are fairly stiff.[1][2] A less popular alternative is to use light trainers with thin soles. Footwear should be neither too loose nor too tight, to help prevent blisters and sore feet. Hiking socks that wick sweat from the feet, provide warmth, and cushion the feet are recommended and a thin, inner sock may also help.[3] Most hiking boots are also designed for other outdoor activities such as backpacking, climbing, mountaineering, and hunting.

Types

A Karrimor hiking trainer.

There are three main types of walking footwear.[4][5]

  1. Trail shoes are made for hiking in dry climates, on well-established, less rugged or rocky paths. They are suitable for many types of day hikes.
  2. Trail hikers are for steeper inclines and muddy paths. They are used where a lightweight boot is most suitable. Trail hikers are also sturdy, higher-cut, and watertight. These boots provide more stability and ankle protection against protruding limbs and rocks than hiking shoes do.
  3. Mountain walking or hiking boots are designed for mountain and hill walking, backpacking and mountaineering. Crampons can be attached to them for a better grip on glaciers or hard-packed snow. They are extremely strong, durable, and have stiff soles to give the ankles support and protection on difficult rocky trails. Mountaineering boots are usually taller and stiffer than hiking boots, providing insulation as well as support and protection.

Parts

  1. Upper - The upper part of a hiking boot is intended to protect and support the foot with an all-over snug fit. Uppers should be water repellant/proof, but allow the feet to breathe to prevent excess moisture from causing blisters and other discomfort.[6]
  2. Soles - Hiking boots have deep-lugged soles of tough rubber to provide friction and avoid slipping on any surfaces. Soles absorb and redirect shocks, and provides cushion for the feet.
  3. Tongues - The flaps that cover the inlet of the upper are called tongues. This is the part the goes underneath the laces. Tongues make sure that water, dirt and debris will not enter the boots.
  4. Linings and Paddings - Linings and paddings provide more protection and comfort for the feet.
  5. Insoles / Footbeds - Insoles are the bottom part of the inner that the feet rest on. Insoles that are perfectly shaped to the hiker's feet will ensure maximum support and balance.
  6. Shanks - The stiff plastic or metal plates built into the sole. Boots are made with full, three-quarter, or half-length shanks. Longer shanks make for stiffer boots.
  7. Scree Collars - Protects the Achilles tendon and ankle from chafing.
  8. Crampon Connections - Crampons are worn on boots to provide traction on snow and ice.

Rubber boots

Most [7] are constructed of leather, sometimes with a breathable waterproof lining, such as Gore-Tex. However, the shoes are not comparable to rubber boots when it comes to being waterproof and drying quickly, making it difficult to cross rivers while keeping the inside of the boot dry. Although there are rubber lace-up boots designed for hiking purposes, rubber hiking boots are not ideal for extensive use because the feet cannot breathe and sweat extensively, which can lead to foot problems such as blisters, fungal infections and trench foot. These drawbacks negate any advantage rubber boots have in keeping out external moisture. However non-rubber hiking boots are generally quite expensive and require more care. The largest hiking boot is 7.14m long, 2.5m wide, and 4.2m tall by Schuh Marke (Germany).[8]

See also

References

  1. ↑ "Q&A with Custom Hiking Bootmaker". Hiking Boots Blog. 2010-07-27.
  2. ↑ British Mountaineering Council: New Hill Walkers.
  3. ↑ British Mountaineering Council: New Hill Walkers.
  4. ↑ Ryan Stuart, "Buyer's Guide: Hiking Boots". Explore, August 9, 2013.
  5. ↑ The Ramblers/Britain/Go Walking/Equipment/Footwear
  6. ↑ article about boots in online magazine Backpacker
  7. ↑ hiking boots
  8. ↑ Glenday, Craig (2013). Guinness World Records. The Jim Pattison Group. p. 052. ISBN 978-1-908843-15-9.
This article is issued from Wikipedia - version of the 11/15/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.