HES Unidaptor

The HES Unidaptor is a video game adapter which allows any Nintendo Entertainment System (NES) console game to be operated on any NES hardware despite the 10NES region security chip. It was developed by Australian company Home Entertainment Suppliers Pty. Ltd. (HES). Two models were released: the HES Unidaptor and the HES Unidaptor MKII. Neither version is compatible with the original Japanese Famicom.

Background

Nintendo, in an attempt to prevent companies releasing an unlicensed Nintendo game (which is not illegal to do), in later revisions of their hardware locked out these titles. To circumvent this, HES developed a bypass technology called the 'Piggy Back' or 'Dongle' game, where you could insert an officially licensed NES cartridge into the back of a HES game and it operated using the country code of the official title. This was so successful HES also used this technology to build a converter to bypass the 10NES security protocol entirely, released as the HES Unidaptor.

Other companies have released similar products but none that allows the conversion of all NES games onto all NES hardware.

Models

HES Unidaptor

The original HES Unidaptor is quite a bulky device with a cartridge that slips into the NES unit, and straps over the top of the NES. The component that lies atop of the NES has three slots.

Slot 1 is the master slot which is where the user inserts an official licensed NES game compatible with the NES hardware so that the 10NES chip can read the country code from the master's EPROM. The others, Slot 2 and Slot 3 (called the slaves), allowed the user to insert either a 72-pin NTSC/PAL cartridge to play or a 60-pin Famicom respectively.

When the NES was switched on it read the security code from the local licensed title, and then executed the code on the slave’s cartridge. Because its connector to the NES was only made with a 72-pin configuration, this unit was only compatible with American, European, Australian and New Zealand NES machines. However it was still able to play 60-pin Japanese Famicom games on those systems.

HES Unidaptor MKII

A more refined and cheaper version was released that was more similar in appearance to HES games. It was simply a cartridge that slotted into the NES, which had two 'Piggy back' slots (the bottom being the master and the top being the slave).

This unit only supported 72-pin NTSC/PAL cartridges.

Other NES/Famicom converters

See also

External links

This article is issued from Wikipedia - version of the 2/11/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.