GNSS software-defined receiver
Not to be confused with GNSS navigation software.
A software GNSS receiver is a GNSS receiver that has been designed and implemented following the philosophy of Software-defined radio.
A GNSS receiver, in general, is an electronic device that receives and digitally processes the signals from a GNSS satellite constellation in order to provide position, velocity and time (of the receiver).
GNSS receivers have been traditionally implemented in hardware: a hardware GNSS receiver is conceived as a dedicated chip that have been designed and built (from the very beginning) with the only purpose of being a GNSS receiver.
In a software GNSS receiver, all digital processing is performed by a general purpose microprocessor. In this approach, a small amount of inexpensive hardware is still needed, known as the frontend, that digitizes the signal from the satellites. The microprocessor can then work on this raw digital stream to implement the GNSS functionality.
Hardware vs. software GNSS receivers
When comparing hardware vs software GNSS receivers, a number of pros and cons can be found for each approach:
- Hardware GNSS receivers are in general more efficient from the point of view of both computational load and power consumption since they have been designed in a highly specialized way with the only purpose of implementing the GNSS processing.
- Software GNSS receivers allow a huge flexibility: many features of the receiver can be modified just through software. This provides the receiver with adaptive capabilities, depending on the user's needs and working conditions. In addition, the receiver can be easily upgraded via software.[1]
- Under some assumptions, Software GNSS receivers can be more profitable for some applications, as long as sufficient computational power is available (and can be shared among multiple applications). For example, the microprocessor of a smartphone can be used to provide GNSS navigation with the only need of including a frontend (instead of a full, more expensive, hardware receiver).
Currently, most of the GNSS receiver market is still hardware. However, there already exist operational solutions based on the software approach able to run on low-cost microprocessors. Software GNSS receivers are expected to increase their market share or even take over in the near future, following the development of the computational capabilities of the microprocessors (Moore's law).
Comparison of implementations
- This comparison is strictly about GNSS SDR; please do not include general GNSS positioning and mapping software.
- Galileo Satellite Navigation LTD.- GSN:
- URL: http://galileo-nav.com
- Business Model - IP core license + royalties
- Development
- Programming language: C
- User interface - NMEA
- Hardware support:
- Platforms
- PC - windows
- PC - Linux
- CEVA - XC family
- CEVA - TL3/4
- Cadence (Tensilica) - BBE16/32
- RF FE
- MAXIM
- NEC
- Platforms
- GNSS/SBAS signals support:
- Features:
- Acquisition: yes
- Tracking: yes
- Generating pseudo-range observable: yes
- Decoding navigation data: yes
- Position estimation: yes
- Maximum number of real-time channels demonstrated: 16/system
- Multi-correlator: yes
- Sample data recording: yes
- SX3 (formerly SX-NSR)
- General information:
- Development:
- Hardware support:
- Front-ends: NavPort, NavPort-4, SX3 frontend
- Host computer special hardware supported: SIMD (SSE2, SSSE3), CUDA
- Multicore supported: yes
- GNSS/SBAS signals support:
- Features:
- Acquisition: yes (several algorithms)
- Tracking: yes (several algorithms)
- Generating pseudo-range observable: yes
- Generating carrier-phase observable: yes
- Decoding navigation data: yes
- Spectrum analyzer: yes
- Position estimation: yes
- Maximum number of real-time channels demonstrated: 490 (GPS L1 C/A channels @20 MHz sample rate, 3 correlators per channel, INTEL Core i7-4970K processor (not over clocked) )
- Application programming interface: yes
- Dual antenna support: yes
- Scintillation monitoring: yes
- Multi-correlator: yes
- Sample data recording: yes
- Multipath mitigation: yes (several algorithms)
- GNSS-SDRLIB
- General information:
- URL: http://www.taroz.net/gnsssdrlib_e.html
- Publication:
- Software licence:
- Development:
- Programming language: C
- User interface (none, CLI, GUI): CLI, GUI.
- Number of developers: 1?
- Under active development (as-of date): yes (2013-Sep-25)
- Creator/sponsor organization: Tokyo University of Marine Science and Technology, Japan
- Latest release (version and date):
- First release (version and date):
- Hardware support:
- Front-ends: NSL STEREO v2 and SiGe GN3S Sampler v3
- Host computer special hardware supported: SIMD (SSE2 and AVX)
- Multicore supported?:
- GNSS/SBAS signals support:
- Features:
- Acquisition: yes
- Tracking: yes
- Generating pseudo-range: yes
- Decoding navigation data: yes
- Spectrum analysis: yes
- Position estimation: yes (through RTKLIB)
- Maximum number of real-time channels demonstrated: ?
- General information:
- ARAMIS(TM) (formerly iPRx)
- Versions:
- Free academic version : http://www.ip-solutions.jp/free%20SDR%20receiver.html
- Ionospheric Scintillation Monitor receiver
- R&D version
- General information:
- Development:
- Programming language: C++
- User interface : GUI
- Under active development (as-of date): yes (2014-Nov)
- Creator/sponsor organization: iP-Solutions, Japan, JAXA, Japan
- Latest release (version and date): April 2014
- First release (version and date): April 2008
- Hardware support:
- Front-ends: Eagle, FEM, MFR
- Multicore supported: yes
- GNSS/SBAS signals support:
- Features:
- Acquisition: yes
- Tracking: yes
- Generating pseudo-range observable: yes
- Generating carrier-phase observable: yes
- Decoding navigation data: yes
- Position estimation: yes
- Maximum number of real-time channels : 60 (5 correlators per channel)
- Application programming interface: yes
- Dual antenna support: yes, for FEM front end
- Multi-correlator: yes
- Sample data recording: yes
- Versions:
- SoftGNSS v3.0 (also known as SoftGPS)
- General information:
- URL: SoftGNSS @ Aalborg Team , SoftGNSS @ University of Colorado
- Publication: http://www.springer.com/birkhauser/engineering/book/978-0-8176-4390-4
- Source code: included with the book
- Software licence: GPL v2
- Non real-time (post-processing) GNSS software receiver
- Development:
- Hardware support:
- Front-ends: SiGe GN3S Sampler v1 (in the original SDR and driver release). Signal records originating from other Sampler versions or other front-ends require configuration changes and in some cases also minor code changes.
- Host computer special hardware supported: no
- Multicore supported?: no
- GNSS/SBAS signals support (separate version for each band of each GNSS):
- GPS: L1CA
- Features:
- Acquisition: yes
- Tracking: yes
- Generating pseudo-range observable: yes
- Generating carrier-phase observable: no
- Decoding navigation data: yes
- Position estimation: yes
- General information:
- GNSS-SDR, An open source GNSS Software Defined Receiver
- General information:
- URL: http://gnss-sdr.org/
- Source code: https://github.com/gnss-sdr/gnss-sdr.git
- Software licence: GPL v3
- Development:
- Programming language: C++
- User interface (none, CLI, GUI): CLI.
- Number of developers: 8 (along the project)
- Under active development (as-of date): yes (2016-Sep-24)
- Creator/sponsor organization: Centre Tecnològic de Telecomunicacions de Catalunya
- Latest release (version and date): 0.0.8 (as Sept. 2016)
- First release (version and date): 2011-Mar-11 first svn commit
- Hardware support:
- GNSS/SBAS signals support:
- Features:
- General information:
- GNSS-SDR, An open source GNSS Software Defined Receiver based on SoftGNSS v3.0
- General information:
- URL: http://gnss-sdr.ru/index.php?blogid=2
- Source code: https://code.google.com/p/gnsssdr/
- Software licence: GPL v3
- Non real-time (postprocessing) GNSS software receiver
- Development:
- Programming language: SciLab
- Number of developers: 1
- Under active development (as-of date): yes (2013-Sep-25)
- GNSS/SBAS signals support (separate version for each band of each GNSS):
- Features:
- Acquisition: yes
- Tracking: yes
- Generating pseudo-range observable: yes
- Generating carrier-phase observable: no
- Decoding navigation data: yes
- Position estimation: yes
- General information:
- TRIGR
- OpenSourceGPS
- NAMURU
- GNSS SDR Tools for Education and Research
- GPL-GPS
- GPSRCVR
- WitchNavigator
- kkGPS
- ipexSR
- GSNRx
- SNACS snSDRGPS
- SoftGNSS
- iPRx
- GMV srx-10
- FGI-GSRx
Front-ends
- Ettus USRP ($675+)
- Nuand bladeRF ($420+)
- CCAR/SiGe/sparkfun GN3S ($450,$405)
- Digial TV Dongle ($25?)
- NSL STEREO v2 (£650)
- gnss-sdr.ru open-hardware L1 band
- OneTalent GNSS SdrNavXX (€250-800)
- iP-Solutions academic (Eagle), multi-system (FEM), multi-frequency (MFR) GNSS front ends (from $550)
- TeleOrbit GTEC RFFE developed by Fraunhofer IIS
References
- ↑ Real-Time Software Receivers, GPS World, September 1, 2009 by Pierre-André Farine, Marcel Baracchi-Frei, Grégoire Waelchli, Cyril Botteron
Further reading
- Borre, K; Akos, D; Bertelsen, N; Rinder, P; Jensen, S H (2007). A software-defined GPS and Galileo receiver: a single-frequency approach. Birkhauser. ISBN 978-0-8176-4390-4.
- Pany, Thomas (2010). Navigation Signal Processing for GNSS Software Receivers. Artech House. ISBN 9781608070282.
- Petrovski, Ivan; Tsujii, Toshiaki (2012). Digital satellite navigation and geophysics a practical guide with GNSS signal simulator and receiver laboratory. Cambridge University Press. ISBN 9780521760546.
- K. Karimi, A. Pamir, M.H. Afzal (2014). "Accelerating a Cloud-Based Software GNSS Receiver" (PDF). International Journal of Grid and High Performance Computing. 6 (3).
External links
This article is issued from Wikipedia - version of the 9/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.