Durable water repellent

A shiny spherical drop of water on blue cloth
Fluorine-containing durable water repellent makes a fabric water-resistant.

DWR (durable water repellent) is a coating added to fabrics at the factory to make them water-resistant (or hydrophobic). Most factory-applied treatments are fluoropolymer based.[1] Durable water repellents are commonly used in conjunction with waterproof breathable fabrics such as Gore-Tex to prevent the outer layer of fabric from becoming saturated with water. This saturation, called 'wetting out,' can reduce the garment's breathability (moisture transport through the breathable membrane) and let water through. As the DWR wears off over time, re-treatment is recommended when necessary. Many spray-on and wash-in products for treatment of non-waterproof garments and re-treatment of proofed garments losing their water-repellency are available from sources of sporting apparel. Sprays are made by Grangers, Nikwax, Stormsure, McNett, Trek7, Dry Guy Waterproofing and others.

Older methods for factory application of DWR treatments involve applying a solution of a chemical onto the surface of the fabric by spraying or dipping.

More recently the chemistry is applied in the vapor phase using Chemical Vapor Deposition (CVD) machinery. The advantages of CVD include: (1) It eliminates the use of hazardous and environmentally harmful solvents in the application process; (2) The process requires less chemical; (3) the waterproof layer is extremely thin and has less effect on the natural look and feel of the fabric.

Later advances have eliminated perfluorinated acids, considered to be potentially hazardous to human health by the US Environmental Protection Agency and numerous research studies,[2] from the application process.

An overview of the current situation on use of per- and polyfluoroalkyl substances (PFASs) within repellent clothing has been written by three industry experts[3]

Re-treating garments

Certain types of fabrics need to be re-treated to maintain water-repellency, as fluoropolymers decompose over time when exposed to water and chemicals.[4] Washing the garment with harsh detergents usually accelerates DWR loss; in addition, soaps often leave a residue which attracts water and dirt.[5] On the other hand, rain water or salt water affects DWRs less significantly. Affected garments can be treated with a 'spray-on' or 'wash-in' treatment to improve water-repellency. In some cases heat treatment can reactivate the factory applied repellent finish and aid in the repelling of water, and other liquids such as oils. On the other hand, some DWR products do not require heat treatment to be activated, and sometimes DWR treatments can be revitalized simply by washing the fabric with a suitable cleaner.

Top part of the fabric has been ironed after re treatment washing and this heat application has revitalized the repellency of water. Bottom part of the fabric has not been ironed after re treatment washing and the water is still wetting out the fabric.

See also

References

  1. ↑ Durable Water Repellents
  2. ↑ Frequent Questions | PFOA and Fluorinated Telomers | OPPT | OPPTS| US EPA
  3. ↑ http://www.europeanoutdoorgroup.com/responsibility/public-resources/reports/building-knowledge-about-pfcs-in-the-outdoor-industry/
  4. ↑ Lower, Stephen. "10.2: The Liquid State". UC Davis ChemWiki. Retrieved 13 September 2015.
  5. ↑ Fowler, Will. "How to Re-Treat Garments". Sani-Tred. Retrieved 13 September 2015.
This article is issued from Wikipedia - version of the 9/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.