Dudek Rex
Rex | |
---|---|
Role | Paraglider |
National origin | Poland |
Manufacturer | Dudek Paragliding |
Status | Production completed |
Produced | late 1990s - mid-2000s |
Unit cost |
€850 (Rex 27, 2004) |
The Dudek Rex is a Polish single-place, paraglider that was designed and produced by Dudek Paragliding of Bydgoszcz. It is now out of production.[1]
Design and development
The Rex was designed as an beginner glider for pilots undergoing flight training and also for novice pilots. It is made from Skytex material with Technora lines. The models are each named for their approximate wing area in square metres.[1]
Operational history
Reviewer Noel Bertrand described the Rex in a 2003 review as "technically very elaborate".[1]
Variants
- Rex 25
- Small-sized model for lightweight pilots. Its 10.65 m (34.9 ft) span wing has a wing area of 25.67 m2 (276.3 sq ft), 33 cells and the aspect ratio is 4.41:1. The pilot weight range is 45 to 75 kg (99 to 165 lb).[1]
- Rex 27
- Mid-sized model for medium weight pilots. Its 11.02 m (36.2 ft) span wing has a wing area of 27.51 m2 (296.1 sq ft), 33 cells and the aspect ratio is 4.41:1. The pilot weight range is 70 to 100 kg (154 to 220 lb).[1]
- Rex 29
- Large-sized model for heavier pilots. Its 11.41 m (37.4 ft) span wing has a wing area of 29.47 m2 (317.2 sq ft), 33 cells and the aspect ratio is 4.41:1. The pilot weight range is 95 to 125 kg (209 to 276 lb).[1]
Specifications (Rex-27)
Data from Bertrand[1]
General characteristics
- Crew: one
- Wingspan: 11.02 m (36 ft 2 in)
- Wing area: 27.51 m2 (296.1 sq ft)
- Aspect ratio: 4.41:1
Performance
- Maximum speed: 44 km/h (27 mph; 24 kn)
- Rate of sink: 1.1 m/s (220 ft/min)
References
External links
This article is issued from Wikipedia - version of the 4/11/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.