Damped wave
A damped wave is a wave whose amplitude of oscillation decreases with time, eventually going to zero. This term also refers to an early method of radio transmission produced by spark gap transmitters, which consisted of a series of damped electromagnetic waves. Information was carried on this signal by telegraphy, turning the transmitter on and off (on-off keying) to send messages in Morse code. Damped waves were the first practical means of radio communication, used during the wireless telegraphy era which ended around 1920. In radio engineering it is now generally referred to as "Class B" emission. However, such transmissions have a wide bandwidth and generate electrical "noise" (electromagnetic interference) which interferes with other radio transmissions.
Because of their potential to cause interference and their resulting wasteful use of radio spectrum resources, there is an international prohibition against the use of class B damped wave radio emissions, established by the International Telecommunications Union in 1938.[1] However the definition of "damped waves" in these regulations is unclear when applied to modern technology, and recently there have been moves to amend this prohibition to exempt emerging radio technologies such as ultra-wideband transmission systems.[2]
See also
References
- ↑ Siwiak,, Kazimierz; Debra McKeown (2004). Ultra-wideband radio technology. USA: John Wiley and Sons. p. 15. ISBN 0-470-85931-8.
- ↑ "Notice of Inquiry: Revision of Part 15 of the Commission's Rules Regarding Ultra-Wideband Transmission Systems" (PDF). ET Docket No. 98-153:. US Federal Communications Commission. August 20, 1998. Retrieved 2010-03-04.
External links
- Sparks Telegraph Key Review A complete listing with photos of damped wave telegraph keys (spark keys) by manufacturer.
- 47cfr2.201 FCC rules where "Type B damped wave emissions" are forbidden.