Cleveland Bridge electric railway station

Cleveland Bridge
Location
Place Great Coates
Area North East Lincolnshire
Coordinates 53°34′44″N 0°06′22″W / 53.5788°N 0.1062°W / 53.5788; -0.1062Coordinates: 53°34′44″N 0°06′22″W / 53.5788°N 0.1062°W / 53.5788; -0.1062
Grid reference TA254108
Operations
Original company Great Central Railway
Pre-grouping Great Central Railway
Post-grouping London and North Eastern Railway
Platforms 0
History
15 May 1912 opened as No. 1 Passing Place
before 1922 renamed Cleveland Bridge
1 July 1956 became line's eastern terminus
3 July 1961 closed[1]
Disused railway stations in the United Kingdom
Closed railway stations in Britain
A B C D–F G H–J K–L M–O P–R S T–V W–Z
UK Railways portal

Cleveland Bridge electric railway station was situated at the first[2] of eight passing loops on the otherwise single track central "country" section[3] of the inter-urban[4] Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

From 1956 the halt was usually referred to as "Grimsby (Cleveland Bridge)".[5]

Overview

The electric railway was built primarily to carry workers between Grimsby and Immingham Dock which the Great Central had built on a greenfield site in a sparsely populated area. The line was also built by the Great Central and remained in railway ownership up to closure in 1961. It therefore appeared in railway timetables[6] and it was possible to buy through tickets between any of the stops on the line and anywhere on the national railway network,[7] though there never was any physical connection with any conventional track,[8] nor with the tramways in Grimsby and Cleethorpes.

In modern parlance the vehicles would be described as trams, but they were usually referred to locally as "tramcars", with related things being called names such as "tramcar halt" and "tramcar bridge" with "car" a more common short form than "tram."

Location and facilities

The middle section of the line passed through thinly populated marshy farmland.[9] The line was single track with passing places ("loops" in railway parlance) every half mile. The points at the ends of the loops were spring loaded as the line was unsignalled, motormen drove by line of sight. All eight passing loops served as halts, with passengers alighting onto cinders beside the tracks. For the benefit of the few who took advantage of these facilities in the early years each passing loop carried its number on a metal plate. Initially the halts were known as No. 1 Passing Place, No. 2 Passing Place etc. Some were named informally at first, but these names stuck and had become official by 1915.[10]

The halt was just outside the western Grimsby Borough Boundary where the line made a sweeping curve[11] known locally as "Tattenham Corner." This curve led to the second of the line's two "hills" - the climb over Cleveland Bridge[12][13] - officially named after the Cleveland Bridge & Engineering Company which built the combined road and tram over rail bridge on behalf of the Great Central Railway but known locally as "The Tip".

No platforms ever existed at any of the stopping places; passengers were expected to board and alight from the roadway or trackside cinders according to the location. The "stations" were much more commonly referred to as "halts" or "stopping places."

Passengers bought their tickets from conductors on board the cars. Cleveland Bridge Halt was a compulsory stop; at Request Stops people hailed a car by giving a clear signal to the motorman or conductor as appropriate.

The lines from the station

Tramcars arrived from the west along conventional rails on a reserved way running parallel to the conventional Grimsby District Light Railway, though there was no physical connection between the two. Grooved tram tracks were used eastwards over the bridge and along the street section into Grimsby. There was also a grooved, street running section around Immingham Town.

Loops 3, 4, 6 and 7 were removed in 1917, the materials being contributed to the war effort. This did not affect the halt at Cleveland Bridge.

Services

Unusually among British tramways services ran round the clock, particularly to provide for railway workers based at Immingham engine shed, whose duties often involved starting or finishing at unsocial hours. Traffic was highly peaked, with convoys of tramcars leaving and arriving to match shift changes at the dock. It was normal for several tramcars to queue to enter and leave Cleveland Bridge at the peaks.

After 1945 industry was attracted to the south bank of the Humber, steadily transforming the landscape from rural to urban, though few workers at the new plants lived locally. This led to an increase in ridership and numbers boarding and alighting at Cleveland Bridge.

This evolutionary growth was greatly surpassed on 1 July 1956 when the street running section east of Cleveland Bridge closed[14] and the halt became the line's eastern terminus.[15] Some people found other ways to get to work, but most who had previously boarded at stops to the east now made their way to Cleveland Bridge on foot or by bike or on one of the new buses provided.[16][17][18] A waiting shelter was erected for this upsurge in waiting passengers.[19]

The east coast floods of 1953 did considerable damage to the tramway's infrastructure, with passengers having to walk between tramcars marooned either side of flooded or washed out sections.[20]

In 1956 over a million passengers used the line[21] and even with deliberate rundown a quarter of a million used it in its last twelve months up to closure in July 1961.[22]

Closure

The line took some years to die. As described above, it was cut back at the Grimsby end in 1956. In 1959 it was reduced to peak services only, it disappeared from Bradshaw and through ticketing beyond the line was withdrawn.[23] Formal closure of the line and Great Coates Level Crossing tramcar halt came on Monday 3 July 1961, with the last cars running on Saturday 1 July 1961, when a convoy of six tramcars set off from Immingham Dock, nominally at 14:03.[24] The last tramcar of this convoy and therefore the last into Cleveland Bridge was Number 4.[25]

Aftermath

The first track on the line to be removed was at Immingham Dock tramcar station, to give increased parking space. The process of demolition was piecemeal and even in 2013 many hints of the line remained, such as spun concrete masts near Immingham Town.

Former Services
Preceding station Disused railways Following station
Pyewipe Depot Halt
Line and station closed		   Great Central Railway
Grimsby and Immingham Electric Railway		   Cleveland Street
Line and station closed

References

Sources

Further material

External links

This article is issued from Wikipedia - version of the 9/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.