Cheong poong bridge

Cheong Poong Bridge
청풍대교
Carries Route 82
Crosses Chungju Lake
Locale North Chungcheong Province, South Korea
Characteristics
Longest span 327m
History
Constructed by Daelim Industrial Co.

Cheong Poong Bridge (Korean: 청풍대교) is a cable-stayed bridge which crosses the lake formed by Chungju Dam (part of the Namhan River system, a tributary of the Han River) in North Chungcheong Province, South Korea on Route 82 in that region.

The bridge project began in December 2004 and was scheduled to be completed in September 2010, to replace an existing PSC box girder bridge which had required periodical rehabilitation and repair work. As the area where the bridge was constructed has well-known natural scenery and attractions, it designed to support tourism development plans.[1]

Construction and design

The bridge was built by contractor Daelim Industrial Co., LTD, at a contract price of 40.3 million USD.[2] Concrete pylon height with typical H-shape is 103m and constructed by auto climbing form. The main span of 327m across the lake is constructed using the free cantilever method and the side span of 57.5m is constructed by the full staging method.[1] The combination of composite section (reinforced concrete deck and I-shaped steel girder) for the center span and concrete section for side spans applied to the bridge because of decreasing effect of weight balance. Concrete pylon has typical H-shape. The leg shape beneath the superstructure level, on the other hand, needs to be narrow down a little bit to make the size of foundation smaller mainly for less rock excavation at foundation locations and better handling of construction unit(caisson) considering the site condition. Cable is MSS(Multi Strand System) as 2 planes semi-fan. An extra pier support in each side span has been applied. To maximize the counter weight effect by concrete girder at side span, it is necessary to make the side span heavier as possible and not to have excessive bending moment by increasing dead load at the same time. Here, the extra pier support gives more opportunity for having more weight and stiffness in side span without resulting in excessive bending moment in girders and pylons.[3]

Carries 2lanes
Location Mooltae-ri~Dohwa-ri, Sheongpung-myeon, Jecheon-si, Chungcheongbuk-do
Total length 442m
Width 14.5m
Height 103m
Longest span 327m
Construction begin DEC. 2004
Construction end SEP. 2010

Gallery

References

  1. 1 2 "Construction of Hybrid Cable-Stayed Bridge",D.G Kim, H.C Kwon, K.J. Lee, IABMAS, 2010
  2. ↑ “Daelim bridge 2013 http://www.daelim.co.kr/static/data/brochure_eng.pdf
  3. ↑ "Design of Cheong-poong bridge (Steel-concrete Hybrid cable-stayeg)", D-H. Yoo, J-S. Ko and C.Moon., 3rd International Symposium on Steel Structures, March 2005

This article is issued from Wikipedia - version of the 11/30/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.