Celair GA-1 Celstar

GA-1 Celstar
Role Glider
National origin South Africa
Manufacturer Celair Pty Limited
Designer Peter Cellier
First flight 1989
Status Production completed
Number built At least eight


The Celair GA-1 Celstar is a South African mid-wing, single-seat, aerobatic glider that was designed by Peter Cellier and produced by his company, Celair Pty Limited.[1]

Design and development

The GA-1 was especially intended for flying competitive glider aerobatics and the resulting airframe was designed to Joint Aviation Requirements 22 standards and stressed to 10 g.[1]

The aircraft is made from a combination of fibreglass and aramid. Its 11.2 m (36.7 ft) span wing employs a Wortmann FX-71-L-150/25 airfoil. The ailerons are full-span and mass-balanced. Dive brakes are used for approach control.[1][2]

At least eight were produced, with two exported to Switzerland and six to the United States.[3]

Operational history

In August 2011 there were two GA-1s registered in the USA with the Federal Aviation Administration. US-registered aircraft are in the Experimental - Racing/Exhibition category.[4]

Specifications (GA-1)

Data from Sailplane Directory[1]

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era
Related lists

References

  1. 1 2 3 4 Activate Media (2006). "GA-1 Celstar Celair". Retrieved 10 August 2011.
  2. Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Retrieved 1 August 2011.
  3. Staff (December 1990). "Celstar Export Makes History". Flight International. Retrieved 10 August 2011.
  4. Federal Aviation Administration (August 2011). "Make / Model Inquiry Results". Retrieved 10 August 2011.

External links

This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.