Billingstad Station

Billingstad

Larsen's station building with the Billingstad Tunnel behind
Location Stasjonsveien
Billingstad, Asker
Norway
Coordinates 59°52′30″N 10°29′2″E / 59.87500°N 10.48389°E / 59.87500; 10.48389Coordinates: 59°52′30″N 10°29′2″E / 59.87500°N 10.48389°E / 59.87500; 10.48389
Elevation 41.2 m (135 ft)
Owned by Norwegian National Rail Administration
Operated by Norwegian State Railways
Line(s) Drammen Line
Distance 17.62 km (10.95 mi) from Oslo S
Platforms 1 island platform
Tracks 2
Construction
Structure type Elevated
Parking 48 places
Bicycle facilities Yes
Architect Torolf Larsen
Other information
Fare zone 2V
History
Opened 3 March 1919 (3 March 1919)
Rebuilt 1959
Electrified 30 August 1922
Traffic
Passengers (2012) 250,000 (annually)
Location
Billingstad
Location within Akershus

Billingstad Station (Norwegian: Billingstad stasjon) is a railway station of the Drammen Line located at Billingstad in Asker, Norway. Situated 17.62 kilometers (10.95 mi) from Oslo Central Station, it consists of an island platform and serves the L1 line of the Oslo Commuter Rail operated by the Norwegian State Railways. The station served 255,000 passengers in 2012. It opened on 3 March 1919; it received a rebuilt in 1958, becoming an elevated station on a section of double track.

History

The Drammen Line past Billingstad opened on 7 October 1872.[1] Inga Falsen Gjerdrum was the main enthusiast to establish a station at Billingstad, and a street near the station is named in her honor.[2] Billingstad opened as a staffed station on 3 March 1919.[3] A year later it received a used station building from Skøyen Station.[2] The line was electrified on 30 August 1922 and an interlocking system was installed on 18 October 1924.[3]

The section of the Drammen Line between Sandvika Station and Asker Station was doubled between 1953 and 1958. As part of this work two sections of track were rerouted, including the segment just east of Billingstad Station. There the 372-meter (1,220 ft) Billingstad Tunnel was built. The double track from Billingstad to Hvalstad Station was the first to open, on 24 July 1953. The tunnel opened with one track on 6 September 1954 and the second on 29 November 1955. However, the segment of double track from Billingstad to Sandvika was not taken into regular use until 9 November 1958.[4]

NSB Arkitektkontor carried out the design of the new station and Torolf Larsen was the architect for Billingstad. Similar to Hvalstad and Slependen, Billingstad was rebuilt as an elevated station with an underpass for traffic and access from below.[5] The new station was taken into use in 1958.[4]

The line past the station received automatic train stop and centralized traffic control on 12 and 14 December 1993, respectively.[1] The station received axle counters instead of track circuits in 2012.[6]

Facilities

Billingstad Station is situated on the Drammen Line, 17.62 kilometers (10.95 mi) from Oslo Central Station at an elevation of 41.2 meters (135 ft) above mean sea level.[3] The line past the station features double track. The station consists of a 220-meter (720 ft) long and 60-centimeter (24 in) tall island platform with two tracks and a shed.[7] The station is elevated and situated over an underpass for road traffic, with access from below. The station building is built in polished concrete and covers the entire width of the platform – and is therefore located at the end. The location on a curve has given it the building a cuneate shape and a lean-on roof.[5]

Billingstad is a mixed residential and commercial area. There are both areas of single dwellings and condominiums within the station's catchment area. In addition the area features a large commercial and industrial site, including an Ikea outlet and its Norwegian headquarters.[8] As of 2008, there were 4,300 people living within 1.0-kilometer (0.62 mi) of the station and 3,600 jobs within the same area.[9] The station has parking for 48 cars and a bicycle stand. There is a ticket vending machine and a taxi stand at the station.[10]

Service

The Norwegian State Railways serves Billingstad with line L1 of the Oslo Commuter Rail. L1 calls at all stations, running from Spikkestad Station along the Spikkestad Line to Asker Station and past Slependen to Oslo Central Station. It then continues along the Trunk Line to Lillestrøm Station. Billingstad has two trains per direction per hour,[11] which is scheduled to increase to four in late 2014. The station had about 900 daily passengers in 2008,[9] and 250,000 annual passengers in 2012.[6] Travel time to Oslo Central Station is 23 minutes.[12]

References

  1. 1 2 Bjerke & Holom: 189
  2. 1 2 "Billingstad (strøk i Asker)". Asker og Bærums Leksikon (in Norwegian). Budstikka. 24 February 2011. Retrieved 30 April 2014.
  3. 1 2 3 Bjerke & Holom: 192
  4. 1 2 Bjerke & Holom: 195
  5. 1 2 Hartmann: 95
  6. 1 2 Svenningsen, Jens (8 October 2013). "Ti år med togsatsing". Budstikka (in Norwegian). pp. 4–5.
  7. ↑ "Network Statement 2014 Annex 3.6.1.1 Station Overview". Norwegian National Rail Administration. 2014. p. 3. Retrieved 5 May 2014.
  8. ↑ "Ikea AS". Asker og Bærums Leksikon (in Norwegian). Budstikka. 7 January 2011. Retrieved 30 April 2014.
  9. 1 2 "Stasjonsstrukturprosjektet: Asker- og Drammenbanen" (PDF) (in Norwegian). Norwegian National Rail Administration. 1 March 2012. pp. 6–8.
  10. ↑ "Billingstad" (in Norwegian). Norwegian National Rail Administration. Retrieved 3 May 2014.
  11. ↑ "Togrutekart for Østlandet" (in Norwegian). Norwegian National Rail Administration. 3 December 2012. Retrieved 3 May 2014.
  12. ↑ "L1 Spikkestad–Asker–Oslo S–Lillestrøm". Norwegian State Railways. Retrieved 3 May 2014.

Bibliography

Wikimedia Commons has media related to Billingstad stasjon.
Preceding station Line Following station
Hvalstad Drammen Line Slependen
Preceding station Local trains Following station
Hvalstad L1 Spikkestad–Oslo S–Lillestrøm   Slependen






This article is issued from Wikipedia - version of the 11/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.