Air Est Goeland

Goeland
Role Motor glider
National origin France
Manufacturer Air Est Services
Designer Robert Clavé
First flight October 1987
Status Production completed
Number built 2 (1998)
Unit cost
US$4000 (fuselage and tail kit only, 1998)
Developed from Scheibe Spatz

The Air Est Goeland (English: Gull), sometimes called the Clavé Goéland, after the designer, is a French parasol-wing, T-tailed, single-seat motor glider that was designed by Robert Clavé and produced by Air Est Services of Marly, Moselle in kit form for amateur construction.[1]

Design and development

The aim of the Goeland was to provide a viable motor glider design based on wings taken from a Scheibe Spatz glider. The kit was supplied with two fuselage halves and the tail parts only, leaving it up to the builder to secure the Spatz wings and engine to finish the aircraft.[1]

The finished aircraft is of mixed construction with a fibreglass fuselage and wood and doped aircraft fabric wings. The 13.20 m (43.3 ft) span wings are mounted on a short pylon above the fuselage, although other sailplane wings can be employed in place of the Spatz wings. The specified König SC 430 18 kW (24 hp) radial engine is mounted in pusher configuration behind the wing and above the tail boom, although other similar engines can be used. The aircraft features tricycle landing gear and a cockpit bubble canopy.[1]

In 1998 the basic kit was US$4400 and included just the fuselage halves and tail. A finished fuselage was US$8400 and plans were advertised at US$200. Building time was estimated at 300 hours.[1]

Specifications (Goeland)

Data from Purdy[1]

General characteristics

Performance

See also


References

  1. 1 2 3 4 5 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 302. BAI Communications. ISBN 0-9636409-4-1

External links

This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.